Table of Contents
Advertisement
Utilities and Equipment
Requirements
Network Requirements
Lifting Equipment
Comments
Signature
3D SYSTEMS RESERVES THE RIGHT TO RECEIVE COMPENSATION FOR NONPRODUCTIVE TIME AND
Sales order number (S.O.)
Printer serial number
3D Systems, Inc.
Atmosphere requirements completed
Electrical requirements completed
3 phase + N + GND electrical cable available (to be supplied
by customer)
400 VAC, 50/60 Hz, 3-phase power available
Measured values:________ VAC, ________ Hz, _______Phase
Transformer installed (if required)
Inert gas requirements completed
Compressed air requirements completed
Cooling fluid additives present (only cooling fluids specified
in §4.8 may be used)
Computer and network requirements completed
3D connect requirements acknowledged (optional service)
CSE requires configuration data during installation
Lifting equipment available + certified lifting equipment
operator on site at the time of installation.
TRAVEL DUE TO FALSE OR INCORRECT INFORMATION ON THIS FORM.
SECTION FILLED OUT BY 3D SYSTEMS
37
Refer to chapter 6
Refer to chapter 7
Refer to chapter 8
p/n: 15-D99, rev. C
Advertisement
Table of Contents
