Setting Time Schedule - Dahua DHI-ITC215-PW6M-IRLZF-B Web Operation Manual

1. Select Yes next to Check Status to enable the status checking of the connected
continuous lights.
2. Set the Work Mode of the continuous light, which can be Always On, Always Off,
Auto by Time and Auto by Ambient Brightness.
● When setting Work Mode to Auto by Time, you need to set the time schedule for
● When setting Work Mode to Auto by Ambient Brightness, you need to set the
Step 4 Set the Illumination Intensity of the continuous light.
Click Confirm.
Step 5

2.5.1.9 Setting Time Schedule

This section introduces the method of setting time schedule, which can be used when setting the
work mode of continuous light and other situations.
Step 1 Click Setting to start setting the time schedule.
Step 2 Double-click each green line to clear the schedule for each day based on the actual
situation, and then you can set the schedule as needed.
Figure 2-41 External light
the continuous light to follow. Refer to "2.5.1.9 Setting Time Schedule" for details.
brightness prevalue of for the continuous light to follow.
Figure 2-42 Time settings
31