Related Manuals for Dahua DH-IPC-K6-I
Summary of Contents for Dahua DH-IPC-K6-I
- Page 1 Dahua HD Mini Network Dome Camera Quick Start Guide Version 1.0.0 Zhejiang Dahua Vision Technology Co., LTD...
-
Page 2: Important Safeguards And Warnings
Welcome Thank you for purchasing our Network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference! Important Safeguards and Warnings 1．Electrical safety ... - Page 3 Please do not touch the heat dissipation component of the device directly in order to avoid scald. Please do not dismantle the device; there is no component which can be fixed by users themselves in the machine. It may cause water leakage or bad image for the device due to unprofessional dismantling.
- Page 4 Please contact the supplier or customer service if there is any problem occurred when using the device. Please contact the customer service for the latest procedure and supplementary documentation. There may be deviation between the actual value of some data and the value provided in the manual due to the reasons such as the real environment is not stable and so on.
-
Page 5: Table Of Contents
Table of Contents Device Structure ....................... 5 Components ......................5 Dimensions ......................7 Installation ......................... 8 Device Installation ....................8 Network Configuration ....................11 Modify IP Address .................... 11 Login WEB Interface ..................13... -
Page 6: Device Structure
1 Device Structure 1.1 Components Note: The following figures are for reference only, which are used to know the device component and cable port function. Device component and cable port function may differ according to different models, please refer to the actual devices for details. Figure 1-1... - Page 7 Figure 1-2 Please refer to the following sheet for detailed structure information. Component Component name Device lens X-Y-Z rotation module Dome enclosure Please refer to the following sheet for detailed port information. Port Port name Function MIC hole Audio input Connect to standard Ethernet Network port cable, provide PoE power supply...
-
Page 8: Dimensions
1.2 Dimensions Please refer to the following figure for the dimension information. The unit is mm. See Figure 1-3. Figure 1-3... -
Page 9: Installation
2 Installation 2.1 Device Installation Note: Please cut off the device power first when installing Micro SD card. Please make sure the installation surface can at least sustain 3X weight of the camera and the bracket. Figure 2-1 Please refer to the steps listed below. Step1 Use the inner hex wrench (provided) to loosen the three inner hexagon screws in the dome cover and then open the cover. - Page 10 Figure 2-2 Note: Press the reset button for 10 seconds to realize device reset function. Step 3 Take out the installation position map form the accessories bag; paste it on the installation surface such as ceiling or wall according to the monitoring area. Step 4 Draw and then dig three plastic expansion bolts holes on ceiling or other installation surface and then insert three expansion bolts in the holes.
- Page 11 The range of lens adjustment angle: vertical rotation direction (0°～+85°), image horizontal rotation direction (0°～+355°), image rotation direction (0°～+360°). Figure 2-3 Step 7 Hold the dome cover, align it with the cable exit location and make the cover back in position. Then use inner hex wrench to fasten three inner hex locking screws to complete installation.
-
Page 12: Network Configuration
3 Network Configuration The IP address of all the cameras is the same when leaving factory (default IP192.168.1.108), in order to make the camera get access to the network smoothly, please plan the useable IP segment reasonably according to the actual network environment. 3.1 Modify IP Address IP address can be acquired and modified through quick configuration tool for the cameras which are accessed via wired network, it needs to connect wired network to configure wireless... - Page 13 Figure 3-1 Step 3 Modify the camera IP address on the “Net” interface, click “Save” to finish modification. See Figure 3-2 for more details. Figure 3-2...
-
Page 14: Login Web Interface
3.2 Login WEB Interface Note: Different devices may have different WEB interfaces, the figures below are just for reference, please refer to the document <<WEB Operation Manual>> in the disk and the actual interface for more details Step 1 Open IE and input the modified camera IP address in the address bar. Step 2 The login interface is shown below;... - Page 15 If there is any uncertainty or controversy, please refer to the final explanation of us. Please visit our website or contact your local service engineer for more information. Zhejiang Dahua Vision Technology Co., Ltd Address：No.1199 Bin’an Road, Binjiang District, Hangzhou, PRC. Postcode: 310053 Tel: +86-571-87688883 Fax: +86-571-87688815 Email:overseas@dahuatech.com...