Assembly and Operation Instructions
Assembly Steps
Remove spreader and components from
Step 1:
carton.
Slide Wheels onto each end of Axle with the
Step 2:
longer portion of the Wheel hub facing the Hopper.
Secure Wheels with 3/16 dia. x 2" Cotter Pins.
Stand spreader upright on Wheels. Attach
Step 3:
Upper Handle assembly to Handle Brace (make sure
Handle is positioned as shown) using (4) 1/4-20 X 1 1/2"
Hex Bolts, and (4) Locknuts. Tighten securely.
TheAndersons_PSSD-AN_ Manual_0720-2
PAGE 2