EVAL-M1-IM818-A user guide
Evaluation power board with MADK M1 connector
System and functional description
2
System and functional description
2.1
Commissioning
EVAL-M1-IM818-A evaluation board is a power system without control part. It has a M1 connector with control
input. Figure 3 is example system setup with Infineon iMOTION
control engine (MCE) evaluation board. When users try to drive the power board with it. Its' user manual
AN2018-01 for the details of the control board.
AC Power
PC-USB
Connector
Figure 3
System connection example using EVAL-M1-IM818-A and EVAL-M1-101T
2.2
Getting Started with EVAL-M1-IM818-A
In order to run the motor system, a combination of the iMOTION™ MADK power board (EVAL-M1-IM818-A) and
the matching MADK control board is required. The iMOTION™ Software Tools MCEDesigner and MCEWizard are
also required in order to initial setup the system, as well as to control and fine-tune the system performance to
match users' exact needs. This chapter provides more details on setting up the system and getting started with
iMOTION™ MADK development platform.
User guide
Input
control board EVAL-M1-101T. This is motor
TM
Motor Phase
Outputs
9 of 35
Revision 1.4
2021-09-10