Mcedesigner Setup Overview - Infineon EVAL-M1-IM818-A User Manual

EVAL-M1-IM818-A user guide
Evaluation power board with MADK M1 connector
System and functional description
2.4.2

MCEDesigner setup overview

After installing MCEDesigner installer, there is a shortcut for MCEDesigner on Windows desktop. Double click
the shortcut to open MCEDesigner and then open "IMC101T_xx.irc" file as shown in Table 4.
MCEDesigner's Main Display for EVAL-M1-101T
Figure 6
To program system drive parameters into IMC101T-T038, please click "Tools" menu and select "Programmer"
in the pull-down list. The pop-up window "Program IMC controller" will show up as in Figure 7. Click on the
"Program Parameters" radio button (this is the default option), and then select the Drive System Parameter file
created using MCEWizard by clicking on "Browse". Finally, click on the "Start" button to program the parameter
file into the IMC101T-T038 IC.
"Program IMC Controller" pop-up window
Figure 7
After Drive System Parameter file has been programmed into IMC101 controller, and the motor drive system is
powered, the MCEDesigner can be used to start/stop the motor, display motor current traces, change the motor
User guide 13 of 35 Revision 1.4
2021-09-10