Description Of The Functional Blocks - Infineon EVAL-M1-IM818-A User Manual

EVAL-M1-IM818-A user guide
Evaluation power board with MADK M1 connector
System and functional description
speeds, modify drive parameters and many other functions. Please refer to the MCEDesigner documentation
for more details.
On-board Debugger portion of EVAL-M1-101T is galvanically isolated from the controller portion and the
Note:
attached power board. In order to program the parameters or firmware to the IMC101T-T038 controller, the
3.3 V DC voltage needs to be supplied to the controller portion of the EVAL-M1-101T. This voltage can either
be supplied by the power board (MADK power boards are designed to supply the 3.3 V to the control board
through M1 connector) or by feeding the 3.3 V DC voltage to the control board through some of the available
3.3 V access/test points if the power board is not attached to the EVAL-M1-101T control board.
To program new firmware and Drive System Parameter into IMC101T-T038, please click "Tools" menu and
select "Programmer" in the pull-down list. The pop-up window "Program IMC controller" will show up as in
Figure 8. Click on the "Program Firmware and Parameter" radio button, and select the Drive System Parameter
file created using MCEWizard by clicking on the "Browse" button on the row of "Program Parameter File", and
then select the firmware file by clicking on the "Browse" button on the row of "Program Firmware File". Finally,
click on the "Start" button to program the parameter file into the IMC101T-T038 IC.
Program Firmware and Parameter in "Program IMC Controller" pop-up window
Figure 8
All the latest firmware files for different types of iMOTION
Infineon iMOTION website (http://www.infineon.com/imotion-software).
TM
2.5

Description of the functional blocks

This chapter covers the hardware design of the EVAL-M1-IM818-A in more detail. It's includes the functional
groups of this power board and interface definition. Engineers can use this board to evaluate the performance
easily. And it is also helpful for users to develop their solution based on the evaluation board design.
User guide
motor control ICs are available for download via
TM
14 of 35 Revision 1.4
2021-09-10