Subscribe to Our Youtube Channel
Related Manuals for Zodiac ARCO ARCOMAX
Summary of Contents for Zodiac ARCO ARCOMAX
- Page 1 ARCO ARCOMAX Instructions for installation and use - English Electric robotic cleaner Translation of the original instructions in French More documents on: www.zodiac.com UDXYARCONE02...
- Page 2 • The distribution or modification of this document in any way is prohibited, without prior authorisation from Zodiac®. • Zodiac® is constantly developing its products to improve their quality. The information contained herein may therefore be modified without notice. GENERAL WARNINGS •...
- Page 3 may cause an electric shock. Contact a qualified technician. • Do not place anything on the robot or on the control box (except for the radio control). • Do not use the robot if any of its components are defective or missing (pump, turbine, screw, nut, cable, etc.).
- Page 4 SPECIFICATIONS " Pool vaccum Robots" • The cleaner must operate in pool water with a temperature of between 10°C and 35°C. • To avoid possible injury or damage to the cleaner, do not operate the cleaner out of the water. •...
-
Page 5: Table Of Contents
TABLE OF CONTENTS ❶ CHARACTERISTICS 1.1 I Description 1.2 I Technical specifications 1.3 I How it works 1.4 I Pool preparation ❷ INSTALLATION 2.1 I Trolley assembly 2.2 I Robot unpacking 2.3 I Robot immersion 2.4 I Electricity supply connections ❸... -
Page 6: ❶ Characteristics
❶ Characteristics 1.1 I Description ARCO ARCOMAX Robot + floating cable Transport trolley Control box and power supply Radio control : Delivered 1.2 I Technical specifications 1.2.1 Technical specifications ARCO ARCOMAX Control box supply voltage 220 - 240 VAC*, 50/60Hz Robot power supply <... -
Page 7: I How It Works
1.3 I How it works The cleaner is independent of the filtration system and can therefore operate autonomously. It just simply needs to be conected to the mains power supply. It finds the best route to move around and clean the areas of the pool for witch it has been designed (depending on the model/ bottom, walls, water lin). -
Page 8: ❷ Installation
❷ Installation 2.1 I Trolley assembly • The cleaner must not roll on the floor to access the pool. It must only be transported on its transport trolley. ARCOMAX ARCO ARCO... -
Page 9: I Robot Unpacking
2.2 I Robot unpacking Before using the pool cleaner for the first time, perform the following steps: Unwind the cable and stretch it out completely so that it does not have any loops, remove the plastic covers and films before use. 2.3 I Robot immersion •... -
Page 10: I Electricity Supply Connections
2.4 I Electricity supply connections To avoid the risk of electric shock, fire or serious injury, respect instructions : • Use of an electrical extension is prohibeted when connecting the control box. • Make sure that the electrical socket can be easily accessed at all times and is protected from rain or splashes. -
Page 11: I Use In Automatic Mode
3.2 I Use in automatic mode 3.2.1 Cleaning cycle selection The robot has 4 modes Automatic "express" programme : Background only: Shorter cycle time, faster movement of the unit and no wall rise. Optimised" automatic programme : Bottom + walls Scans the pool and adapts the robot's movement according to the self-calculation and the pool's dimensions Delayed start : Bottom only... -
Page 12: I Use In Manual Mode
• damage the module). • Point radio control towards the front of the cleaner (identified by Zodiac logo) to use it. • 4 LEDs of the cleaning programs flash if button is flashes, the cleaner is not available to start. -
Page 13: I Ending The Cleaning Cycle
3.4 I Ending the cleaning cycle • To avoid damaging equipment, use only the handle to remove equipment from the water. The robot stops automatically after one cycle. Bring the robot closer by directing it using the radio control or the Bluetooth® application to remove it from the water. -
Page 14: I Preventive Maintenance
4.2 I Preventive maintenance • The cleaner is not adapted for use in sea water. If used in salt water, wash it thoroughly with clean water each time it is removed from the water and have any parts that may be corroded checked by a technician at the end of the season. -
Page 15: ❺ Troubleshooting
❺ Troubleshooting • If a problem occurs, before you contact your retailer, please carry out these few simple checks using the following tables. • If the problem continues, contact your retailer. • : Actions to be performed by a qualified technician only. Despite careful consideration of possible robot trajectories, the cable may twist due to the shape of the pool, obstacles, a specific water flow in the pool or other external factors. -
Page 16: I User Alerts
The filter system is saturated or dirty • Clean filter. and the saturation sensor is illuminated • Even if the filter is not full, invisible micro debris can (red): saturate the filter and make it impossible to raise the wall. •... - Page 17 ©2021 Zodiac Pool Systems LLC. All rights reserved. ZODIAC® is a registered trademark of Zodiac International, ©2021 Zodiac Pool Systems LLC. All rights reserved. ZODIAC® is a registered trademark of Zodiac International, S.A.S.U., used under license. All other trademarks are the property of their respective owners.
Need help?
Do you have a question about the ARCO ARCOMAX and is the answer not in the manual?
Questions and answers