Siemens Sinumerik 808D Operating Manual page 72

Additional
Information
Part 1
SEQUENCE
Manual
face
cutting
"Face cutting" is used to cut the oversized materials on the rough face
before starting to machine.
Step 1
Press the "Machine" key on the PPU.
Press the "JOG" key on the MCP.
Press the "Sett." SK on the PPU.
Enter appropriate values in "Retraction plane" and "Safety distance".
Press the "Input" key on the PPU
to activate the settings.
Operating and Programming — Milling
Step 2
Press "Face cutt." SK on PPU.
Press the "OK" SK on the PPU
Make sure that the override value on the MCP is 0%!
Press the "Cycle Start" key on the MCP.
Adjust the override on the MCP gradually to the required values.
Page 72
s
Enter appropri-
ate data in the
"Face Milling"
window ac-
cording to the
machining
requirement.
Use the but-
ton on the
right side of
the PPU to
select the
cutting path of
the tool during
machining.
The system
now automati-
cally creates
the programs.
808D