Table of Contents
Advertisement
NEX 6620A User's Guide
Power-On Boot
After you have made all the changes to CMOS values and the system cannot boot with the CMOS values
selected in Setup, restart the system by turning it OFF then ON or Pressing the "RESET" button on the
system case. You may also restart by simultaneously press <Ctrl>, <Alt>, and <Delete> keys.
Upon restart the system, immediately press <Insert> to load BIOS default CMOS value for boot up.
BIOS Setup
Rev. B0
0301
4-28
Advertisement
Table of Contents
Need help?
Do you have a question about the NEX 6620A and is the answer not in the manual?