Table of Contents
Advertisement
NEX 6620A User's Guide
The Choice: 4M, 8M, 16M, 32M, 64M, 128M, 256M.
AGP Mode
1X, 2X, 4X
The Choice:
AGP Driving Control
This filed is used to adjust the AGP driving force. Selecting Manual allows you to type an AGP driving
force in AGP Driving Value.
It is strongly suggested to select Auto to avoid causing any system error.
AGP Driving Value
Specifies the AGP driving force.
AGP Fast Write
Enable this function only if the AGP Card supports Fast Write Function. Enable this function can
increase AGP performance.
The Choice: Enabled, Disabled.
AGP Master 1 WS Write
AGP Master One Wait State Write control.
The Choice: Enabled, Disabled.
AGP Master 1 WS Read
AGP Master One Wait State Read control.
The Choice: Enabled, Disabled.
► CPU & PCI Bus Control
Press <Enter> to enter the sub-menu, and you will see a sub-menu.
CPU to PCI Write Buffer
Enables or disables CPU to PCI Post-Write function.
The Choice: Enabled, Disabled.
PCI Delay Transaction
The chipset has an embedded 32-bit posted write buffer to support delay transactions cycles. Select
Enabled to support compliance with PCI specification version 2.1.
The Choice: Enabled, Disabled.
Memory Hole
BIOS Setup
.
Rev. B0
0301
4-15
Advertisement
Table of Contents
