Eu Declaration Of Conformity - Delta MOOVair User Manual

WARNING
CAUTION
CAUTION
CAUTION
2.1

EU declaration of conformity

Hereby, Delta Energy Systems (Germany) GmbH declares that the radio equipment types WPU 1000 W
1AC EU / WSU 1000 W 24 V / WSU 1000 W 48 V are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://filecenter.deltaww.com/Products/Download/21/2110/1kW%20Wireless%20Charging%20System
_EU%20DoC_EN_20207.pdf
6
ELECTROMAGNETIC INTERFERENCE POSSIBILITY
This equipment has been tested and found to comply with the limits for a Class A
device, pursuant to EN 55011 Group 2, EN 55032 Group 2, as well as a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
user manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
Hot surfaces
All parts of the charging system can become hot during operation.
► Always wear safety gloves before handling, or allow 30 minutes to allow the charger
system to cool when not operating.
Sharp edges
The heatsink attached to the WPP has sharp edges.
► Protective gloves should be worn when handling the heatsink.
Material damage
No metallic objects are allowed between the pads during charging, as they may get
heated and damage the plastic cover.
► Select the installation site where no metallic objects can go into the air-gap and stay
on the plastic cover of the pads.
► The pads must be mounted vertically. If the user insists on mounting the pads
horizontally, then they will take full responsibility to ensure there are no metallic
objects between the pads during charging.
► Heated metallic objects could ignite combustible materials if also present.