Display Of Timy2 - ALGE-Timing TIMY2 Manual General

1.5 Display of TIMY2

The TIMY2 has a display with backlight. The backlight makes reading of the display at bad
light conditions easier. As the backlight consumes energy it is only switched on automatically
when the TIMY2 is connected with an external power supply (e. g. PS12A). If you use the
TIMY2 in battery mode you can switch on the backlight in the menu.
•
Press menu key
•
Select <DISPLAY> with arrow down key
•
Press OK key (red or green)
•
Select <Back Light> with arrow down key
•
Press OK key (red or green)
•
The display shows:
ENERGY-SAVE:
ON:
AUTOMATIC:
•
Choose desired light function with arrow down key
•
Press OK key (green or red)
•
Exit menu by pressing menu key
Manual
TIMY2 - General
External Supply:
Battery Operation:
External Supply:
Battery Operation:
after each key stroke or timing impulse the back light is on for 5
seconds
Display Back Light on (100% brightness)
Display Back Light off
Display Back Light on (100% brightness)
Display Back Light on (50% brightness)
Page 9