Dometic Oceanair Skyvenetian Manual Installation And Operating Manual page 10

Installation
When installing the brackets, note the following, see fig. 2, page 10 to fig. 4,
page 11):
• Observe related technical drawings provided with the order for specific dimen-
sions required, depending on head rail size and restraint type.
• When choosing the installation location of the brackets, ensure that the cords
and the tilt wand available for manually operated blinds are not obstructed.
• Observe sufficient distance to the window recess. Depending on the model,
there must be enough space to close the bracket.
• Ensure that there is sufficient distance from parts of the window so that the blind
can be lowered without obstruction.
• Depending on the model, ensure that there is enough room in front of the brack-
ets to be able to access the release clip.
• Ensure that the brackets do not sit over the tilt mechanisms inside the head rail.
• Ensure that the brackets are close to the edge of head rail for best support.
2
10
Skyvenetian Manual/Powered
5 mm
EN