Table of Contents
Advertisement
NLCleaning and maintenance
Clean the sieve elements under
5.
running water.
Carefully clean the dirt edge between
the coarse and fine sieve.
Assemble the screening system.
6.
Check that the coarse sieve locking
tabs are engaged.
Place the sieve system in the
7.
appliance and turn the coarse
sieve clockwise.
Check that the arrow marks are
s
opposite each other.
17.6 Cleaning the spray arms
Limescale and impurities in the wash
water can block the nozzles and
bearings of the spray arms. Clean the
spray arms regularly.
Unscrew the upper spray arm and
1.
pull it downwards
.
44
1
2
Pull the lower spray arm upwards.
2.
Check the nozzles of the spray arms
3.
for blockages under running water
and remove any foreign objects.
Install the lower spray arm.
4.
aThe spray arm audibly clicks into place.
Fit and screw on the upper spray
5.
arm.
Advertisement
Table of Contents
