Cleaning Spray Arms - Siemens SN75Z802BE Information For Use

Table of Contents

Advertisement

Turn the coarse filter anticlockwise
2.
and remove the filter system
Check that no foreign objects
fall into the sump.
Pull down the micro filter to re-
3.
move.
Press the locking catches
4.
gether and lift the coarse filter out
⁠ .
1
Clean the filter elements under run-
5.
ning water.
⁠ .
2
1
to-
2
Cleaning and servicing en
Carefully clean the rim of dirt
between the coarse and the fine fil-
ter.
Re-assemble the filter system.
6.
Make sure that the locking catches
on the coarse filter click into posi-
tion.
Insert the filter system into the ap-
7.
pliance and turn the coarse filter
clockwise.
Make sure that the arrow mark-
ings match up.
17.6 Cleaning spray arms
Limescale and soiling in the dish-
washing water may block the nozzles
and bearings on the spray arms.
Clean the spray arms regularly.
Unscrew the upper spray arm
1.
and pull down to remove
⁠ .
1
2
43

Advertisement

Table of Contents
loading

Table of Contents