Siemens SN23HW01KE User Manual page 38

NLBasic settings
Basic setting
WiFi
Remote Start
Factory setting
Factory setting (may differ depending on the device type)
1
38
Display-
Choice
text
Cn0
Cn0 - Cn1
rc1
rc0 - rc2
re
Start with
YES
To confirm
of
Description
Enable or disable wireless
network connection.
The "Cn0" position disables
the wireless network
connection.
The basic setting "Wif-Fi" is
only available after you have
connected the appliance with
the Home Connect app.
→ "Home Connect",
page 39
→ "Remote Start", page 40
activate or deactivate.
The following settings are
possible:
sWith the setting "rc0", the
function permanently
deactivated.
sWith the setting "rc1" you can
the function can be
selected via the key.
→ "Activate Remote Start",
page 40
sWith the "rc2" setting, the
function permanently
activated.
This basic setting is only
available after you have
connected the appliance with
the Home Connect app.
→ "Home Connect",
page 39
Reset changed settings to
factory condition.
Initial commissioning
settings must be specified.