Setting Up And Connecting The Device; Waste Water Connection; Drinking Water Connection; Electrical Connection - Siemens SN23HW01KE User Manual

Table of Contents

Advertisement

NLSet up and connect
4.2 Setting up and connecting
the device
You can install your undercounter or
built-in appliance in the kitchen unit
between wooden and plastic walls. If
you subsequently install the device as
a free-standing device, you must
secure the device against tipping over,
e.g. by screwing it to the wall or
installing it under a continuous
worktop that is firmly connected to the
adjacent cupboards.
Observe the safety instructions. →
1.
Page 4
Observe the instructions for the
2.

electrical connection.

Check the contents of the package
3.
and the condition of the device.
The required installation dimensions can be found
4.
in the installation instructions.
Level the appliance using the
5.
adjustable feet.
Pay attention to a firm stand.
Install the waste water connection.
6.
→ Page 12
Install the drinking water
7.
connection. → Page 12
Connect the device to the
8.
power.

4.3 Waste water connection

Connect the appliance to a waste water
connection so that the contaminated
washing water can be drained.
Install waste water connection
The necessary steps can be found in
1.
the supplied installation instructions.
12
Connect the drain hose to the
2.
connection nipple of the siphon
using the supplied parts.
Make sure that the drain hose is not
3.
kinked, crushed or tangled.
Make sure that the water does not
4.
flow out by a plug in the waste
water connection.

4.4 Drinking water connection

Connect the device to a drinking
water connection.
Install drinking water connection
Remark
sWhen you replace the device,
you can use a new water supply
hose.
The necessary steps can be found in
1.
the supplied installation instructions.
Connect the device to the drinking
2.
water connection using the
enclosed parts.
Observe the technical data.
Make sure that the drinking water
3.
connection is not kinked, crushed
or tangled.
4.5 Electrical connection
Connecting the appliance electrically
Comments
sTake the safety precautions
→ Page 4 heed.
sPlease note that the
The protection system only works
when the device is supplied with
power.
Connect the appliance plug of the
1.
connecting cable to the
appliance.

Advertisement

Table of Contents
loading

Table of Contents