Table of Contents
Advertisement
en Cleaning and servicing
Press the locking catches
4.
gether and lift the coarse filter out
.
1
Clean the filter elements under run-
5.
ning water.
Carefully clean the rim of dirt
between the coarse and the fine fil-
ter.
Re-assemble the filter system.
6.
Make sure that the locking catches
on the coarse filter click into posi-
tion.
Insert the filter system into the ap-
7.
pliance and turn the coarse filter
clockwise.
Make sure that the arrow mark-
‒
ings match up.
44
to-
17.6 Cleaning spray arms
Limescale and soiling in the dish-
washing water may block the nozzles
and bearings on the spray arms.
2
Clean the spray arms regularly.
Unscrew the upper spray arms
1.
and pull down to remove
Pull up the lower spray arm to re-
2.
move.
Check the outlet nozzles on the
3.
spray arms for blockages under
running water and remove any for-
eign bodies.
Insert the lower spray arm.
4.
The spray arm clicks into position.
a
Insert the upper spray arms and
5.
screw firmly in place.
.
1
2
Advertisement
Table of Contents
