Subscribe to Our Youtube Channel
Related Manuals for ROOMS TO GO Kids Exeter Place 71282BK
Summary of Contents for ROOMS TO GO Kids Exeter Place 71282BK
- Page 6 Instruction It is necessary to be reset manually after ● Manual Reset the initial installation and power off. • Keep pressing down key till desktop display shows “E-1” and “rES” alternately, then release the key. • Keep pressing down key, desktop will move down slowly till display shows “60”.
- Page 7 Instruction Do not enable this function unless ● Reset the highest and lowest positions you really need this adjustment. • Keep pressing the “M” key for 3 seconds till the display shows “S--” to enter setup menu. • Press up key till the display flashes as “HLP”.
- Page 8 Instruction The function can detect whether motors ● Plug detection connected properly. • Once the display shows “E-3” and “rES”, it reminds you to check whether E-3 rES motor fails to connect with control unit. Please connect the main cable again and wait at least 5 seconds.
- Page 9 Code meaning and Trouble shooting 【Code meaning】 Code Information Operating Manual Reset Refer to the process of manual reset Remove the load on desktop till it less than 800N (175 LBS) Overloading for further operation Anti-Collision function It can be used normally after removing the obstacle Operated continuously Stop using the desk for about 9 minutes for further operation...
- Page 10 100～240VAC/4A DewertOkin Technology Group Co., Ltd. DB02.049...
- Page 11 100～240VAC/4A DewertOkin Technology Group Co., Ltd. DB02.049...
Need help?
Do you have a question about the Kids Exeter Place 71282BK and is the answer not in the manual?
Questions and answers