Fetco LEGACY HWB-5 Series Users Manual And Operator Instructions page 16

NOTE
The proper controls voltage for domestic (Americas) equipment are 120Vac.
Domestic equipment is marked 120/208-240VAC to signify that the first voltage, the 120 Volt is 120 volts for the
controls and inlet valve. This configuration also requires a NEUTRAL wire in the wiring bundle. The 208-240VAC of
the 120/220-240 rating is for the heaters.
Brewers and parts marked as EXPORT are only for use in non-Americas equipment.
EXPORT equipment and IP-44 Maritime equipment have 240 volt control boards and inlet valves. The 240 volt control
boards and inlet valves are only for use in equipment marked EXPORT or IP-44 Maritime. This equipment does not
require a NEUTRAL in the wiring bundle and is not used for domestic (Americas) equipment
Go to fetco.com for the latest versions of all information
HWB-10 IP 44
Drawing1101.00423.00
Page 16
P112 Revised November 2021