Advertisement

FOOD EQUIPMENT TECHNOLOGIES COMPANY
640 Heathrow Drive • Lincolnshire • IL • 60069 • USA
Phone: (800) 338-2699 • (847) 821-1177 • Fax: (847) 821-1178
Emergency Service Only: (800) 660-0035 (U.S. & Canada)
E-mail: techsupport@fetco.com • Internet: http://www.fetco.com
Hot
Water
Dispensers
Introduction..................................................................... 2
Product Description/Features ........................................ 2
Technical Data ............................................................... 2
Specifications:............................................................. 2
Weights and Capacities.............................................. 2
Installation ...................................................................... 3
Keys To A Successful Installation .............................. 3
Installation Check List................................................. 4
Dimensions..................................................................... 5
FETCO is a trademark and LUXUS is a registered trademark of Food Equipment Technologies Company.
3
Models: HWB-5

Table of Contents

User's Guide
Installation - Operation - Service
HWB-10
HWB-15
Operating Procedures ....................................................6
Service............................................................................6
Warranty .....................................................................6
Principles of Operation ...............................................6
Adjustments ................................................................7
Basic Troubleshooting ................................................8
HWB Replacement Parts ...............................................9
Cleaning........................................................................10
Wiring Diagrams ...........................................................11
Part # P011
HWB-25
Revised November 4, 2002

Advertisement

Table of Contents
loading

Summary of Contents for Fetco HWB-5

  • Page 1: Table Of Contents

    HWB Replacement Parts ..........9 Keys To A Successful Installation ......3 Cleaning................10 Installation Check List..........4 Wiring Diagrams ............11 Dimensions..............5 FETCO is a trademark and LUXUS is a registered trademark of Food Equipment Technologies Company. Part # P011 Revised November 4, 2002...
  • Page 2: Introduction

    With craftsman like execution, each FETCO product is evaluated for quality, pre-set for installation, and 100% tested for performance prior to shipment. If you have any questions about your new dispenser, please call FETCO at (800) 338-2699, or visit our web site at http://www.fetco.com.
  • Page 3: Electrical Configuration And Heating Efficiency

    (For Qualified Service Technicians Only) Keys To A Successful Installation FETCO dispensers are rugged and reliable machines that will provide many years of service. However, if not installed correctly by qualified personnel, the unit will not operate properly and damage may result. Damages resulting from improper installation are not covered by the warranty.
  • Page 4: Installation Check List

    The installation must comply with applicable federal, state, and local codes having jurisdiction at your location. Check with your local inspectors to determine what codes will apply to the installation and operation of FETCO products. 1. Review the Dimensional Drawings (page 5) and the Operating Procedures (page 6) for the unit you are installing.
  • Page 5: Dimensions

    16. Review the entire operating procedures with whoever will be using the dispenser. Be sure to show the location and operation of the water shut off valve as well as the circuit breaker for the dispenser. Dimensions HWB-5 HWB-10 HWB-15...
  • Page 6: Operating Procedures

    Service Warranty All FETCO dispensers come with a limited warranty. A detailed warranty statement is packaged separately with each dispenser. All warranty service must be pre-authorized by calling the FETCO Service Department at (800) 338-2699. Principles of Operation...
  • Page 7: Adjustments

    Temperature System: The temperature system consists of an electronic thermostat and probe to control the temperature of the dispensed water, a mechanical thermostat and probe to control the ready light, and heating elements. The system is enabled by the liquid level control board. (See the previous section - Fill Circuit.) When the water level probe is in contact with water, power is delivered to the electronic thermostat through the liquid level control board.
  • Page 8: Basic Troubleshooting

    ⊕ ⊕ ⊕ normal factory setting not available at time of publication Basic Troubleshooting HWB-5 / 10 / 15 / 25 Gallon Hot Water Dispensers Dispensing Problem Possible Cause Solution Faucet drips Worn seat cup When you have replacement parts, turn the power off on the dispenser.
  • Page 9: Hwb Replacement Parts

    HWB Replacement Parts For US & Canada Versions – 120/208-240 VAC Used On Part Number Description HWB-5 HWB-10 HWB-15 HWB-25 54014 liquid level control board, 120V 2010 water level probe, short 2051 water level probe, long 21026 water level probe housing (2 required)
  • Page 10: Cleaning

    Cleaning Stainless Steel (These procedures were developed by NAFEM and Packer Engineering.) 1. Use the proper tools. Don’t use; steel pads, wire brush, or scrapers When cleaning your stainless steel products, take care to use non-abrasive tools. Soft cloths and plastic scouring pads will not harm the steels passive layer.

This manual is also suitable for:

Hwb-10Hwb-15Hwb-25

Table of Contents