elero PatioControl Operating Instructions Manual page 72

Handling
Module Handling
Prerequisites •fThe hand-held transmitter is teached-in.
•fThe correct channel on the hand-held transmitter
•fThe path limits of the actuators are teached-in.
1. Switch the power
2. Open the pergola
3. Switch the power supply to
4. Set the light potentiometer to a
6. Switch S1:
•fDIP-1 = OFF
•fDIP-2 = OFF
28
is set.
supply to ON.
to about 50%.
the Sensero to ON.
value between 2 and 9.
NOTE
Set the Sensero to the privacy mode.
(see Sensero/Plus instructions:
www.elero.de/de/produkte/steuerungen/
sensero-868-ac-plus/)
Result
•fLED-1 green lights.
•fGreen operation LED [9] on the Sensero lights.
Deactivating the radio receiver