elero PatioControl Operating Instructions Manual page 59

1. Connect the 24 V power supply to the + and - terminals.
Use the applicable cable gland.
2. Connect the first actuator to the M1+ and M1- terminals.
3. Connect an optional temperature sensor to the T+ and T- terminals.
NOTE
Install the temperature sensor outside and close to the slats.
Option:
4. If necessary, connect a second actuator to the M2+ and M2- terminals.
PatioControl
SPEED
FORCE
S4
S5
S3
SPEED
FORCE
S4
S5
S3
Structure/description
15