Advertisement
EN
16
Technical Specification
6. TECHNICAL SPECIFICATION
Power supply
Speed without load
Battery
Collet diameter:
Protection class
Electric twist
Take appropriate measures to protect your hearing! Wear hearing protection whenever the sound pressure
exceeds the level of 80 dB (A).
Weighted effective acceleration according to EN 6074 5: 2,11 m/s2 K=1.5
Caution: The vibration level may vary during power tool operation from the declared value depending on
the way the power tool is used and depending on the following conditions: Method of power tool use and type of
material being cut or drilled, conditions of the power tool and method of its maintenance, appropriateness of the
used accessories and ensuring its sharpness and good conditions, the strength of handle gripping, use of anti-
vibration equipment, suitability of the power tool for the purpose for which it has been designed and compliance
with workflows according to manufacturer's instructions.
If this power tool is used in an inappropriate manner, a hand/shoulder vibration syndrome may appear.
Caution: For clarification, it is necessary to consider the level of vibrations in specific conditions of use in
all operating modes, e.g. the time when the power tool is switched off except for the operation time, and when
it idles, i.e. performs no work. This may substantially decrease the exposition level during the whole operating
cycle.
Minimize the risk of vibrations, use sharp chisels, drill and blades.
Keep the power tool in compliance with these instructions and provide for its proper lubrication.
When using the power tool regularly, invest into anti-vibration equipment.
Do not use the power tool under temperatures lower than 10°C. Plan your project containing work with the power
tool producing high vibrations carefully and spread it over more days.
Subject to changes.
7.2 V DC
5000-25000min
-1
7.2 V DC 1000 mAh, Li-Ion
3.2 mm
III (IP20)
IP20
FDMB 200170-A
Advertisement
