Table of Contents
Advertisement
D. Install Cooling Air Hoods (PROVIDED)
WARNING!
Cooling air must be provided when install-
ing in combustible enclosure or on combustible surface.
•
Locate cooling air hoods to prevent blockage from
leaves, snow/ice, or other debris. Blockages could
cause the unit to overheat.
•
The lowest point of the cooling air hoods to be located
a minimum of 12" above the bottom of unit.
•
Do Not place cooling air hood close to exhaust vent.
•
Cut a 4 in. hole in the enclosure for the hood.
•
The outside air hood can be painted to match/accent
the color of the structure.
•
An air grille can be used in place of the plastic hoods
(Provided); Grill MUST have a minimum of 25 sq/
in opening to allow for proper cooling air flow to unit.
Lowest edge of grille to be located a minimum of 12"
above the bottom of the unit
Caution
! Risk of Fire or Asphyxiation! Do not draw
outside air from wall, floor, or ceiling cavity, or enclosed
spaces such as an attic or garage.
Figure 7.3 Cooling Air Hood
Outdoor Lifestyles by Hearth & Home Technologies • ODVILLA Wood Owners/Install • 4072-345 Rev A • 08/22
21
Advertisement
Table of Contents
