Sidewalls/Surrounds; Frame The Fireplace - Outdoor Lifestyles ODVILLA-36 Owner's Manual

C. Sidewalls/Surrounds
• Adjacent combustible sidewalls must be located a minimum of 12 in. (305 mm) from the fireplace opening.
• Combustible and non-combustible mantel legs, surrounds and stub walls may be constructed within the gridded area,
Figure 6.3.
FLUSH
FRONT
11 1/4 in.
[286 mm]
12 in.
[305 mm]
Figure 6.3 Mantel Leg or Wall Projections (Acceptable on both sides of opening)
D. Frame the Fireplace
Figure 6.4 shows typical framing using combustible materials (2x4 lumber shown).
• Observe all required air space clearances to combustible materials as shown in Figure 6.1 & 6.2.
• Framing across the top of fireplace must be above top standoffs.
14 1/2 in.
(368 mm)
framing
C
B
Figure 6.4 Framing the Fireplace
18 Outdoor Lifestyles by Hearth & Home Technologies • ODVILLA Wood Owners/Install • 4072-345 Rev A • 08/22
4 in.
BRICK
[102 mm]
FRONT
A
9 3/4 in.
[248 mm]
B
12 in.
[305 mm]
A
Model
ODVILLA-36
ODVILLA-42
* If interior of chase will be drywalled, add the thickness to
this measurement.
** Adjust header height for a raised floor under fireplace.
Model
ODVILLA-36
ODVILLA-42
Header MUST NOT be notched!
A
in. 42
mm 1067
in. 48
mm 1219
A B
Fireplace Outside
opening Dimensions
36 in. 41 in.
914 mm 1041 mm
42 in. 47 in.
1067 mm 1194 mm
B* C**
21 1/2 39 3/4
546 1010
21 1/2 39 3/4
546 1010