Assembly Options; Retrofitting Flue Pipe Connection Top To Rear Connection - RIKA FOX II Instruction Manual

5 . A S S E M B L Y
REFITTING THE TOP SMOKE PIPE
CONNECTION TO THE REAR CON-
NECTION
➧ Remove the stone top plate (part 8/ spare part
overview 1). Check the securing device of the side
sections (part 54/ spare part overview 1) to prevent
tipping.
When refitting please note that the individual parts of
the stone lining weigh approximately 40 kg. In addi-
tion, the surface of the stone should be protected to
prevent it from scratching.
➧ Now remove the two stone side panels (part 55/
spare part overview 1).
O P T I O N S
➧ Remove the lamellas (part 32, 33/ spare part
overview 1) by loosening the two hexagon head
screws.
➧ Cut the pre-stamped round section in the rear
panel (part 40/ spare part overview 1) using an iron
saw blade.
➧ Exchange the smoke tube outlet and cooking
plate lid (part 35, 30/ spare part overview 1).
➧ Reassemble the new lamella (part 31/ spare part
overview 1 - must be ordered as an optional extra)
and the stone side panels in reverse order.
(Please watch your fingers when doing this!)
- 17 -