Steris Hausted Horizon Series Operating Manual
  1. Manuals
  2. Brands
  3. Steris Manuals
  4. Medical Equipment
  5. Hausted Horizon Series
  6. Operating manual

Steris Hausted Horizon Series Operating Manual

Multi-purpose stretchers – electric powered 120/230 vac
Hide thumbs Also See for Hausted Horizon Series:
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATING MANUAL
®
®
Hausted
Horizon
Series
Multi-Purpose Stretchers – Electric Powered
Models: 4E1 & 4E2 (120 VAC), 4D2 (230 VAC)
(08/30/06)
069389

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hausted Horizon Series and is the answer not in the manual?

Questions and answers

Related Manuals for Steris Hausted Horizon Series

Summary of Contents for Steris Hausted Horizon Series

  • Page 1 OPERATING MANUAL ® ® Hausted Horizon Series Multi-Purpose Stretchers – Electric Powered Models: 4E1 & 4E2 (120 VAC), 4D2 (230 VAC) (08/30/06) 069389...
  • Page 2 These instructions are important to protect the contained in this manual. contained in this manual. health and safety of personnel operating a Hausted Horizon Series Electric Powered Multi-Purpose Stretcher and should be retained in a conveniently accessible area for quick reference.
  • Page 3 EC Authorized Representative STERIS Limited STERIS House Jays Close Viables Basingstoke Hampshire RG22 4AX UNITED KINGDOM Manufactured by: STERIS Corporation 2720 Gunter Park East Montgomery, AL 36109 • USA www.steris.com TEL: 334 277 6660 FAX: 334 271 5450 Class 1 Equipment...

  • Page 4: Table Of Contents

    TABLE OF CONTENTS Section Title Page 1 LISTING OF WARNINGS AND CAUTIONS ........1-1 2 UNPACKING INSTRUCTIONS ............2-1 3 OPERATING INSTRUCTIONS ............3-1 3.1 Stretcher Specifications ....................3-1 3.2 Features, Warnings and Proper Operation ..............3-3 3.3 Braking and Steering Operation ................... 3-5 3.3.1 Applying the Brakes .....................
  • Page 5 Section Title Page 5 RECOMMENDED PREVENTIVE MAINTENANCE ......5-1 5.1 Recommended Cleaning Instructions ................5-1 6 OPTIONAL ACCESSORIES.............. 6-1 7 RECOMMENDED REPLACEMENT PARTS ........7-1 069389 Operator Manual Table of Contents...

  • Page 6: Listing Of Warnings And Cautions

    LISTING OF WARNINGS AND CAUTIONS The following Safety Precautions must be observed when operating or servicing this Hausted ® Horizon ® Multi-Purpose Stretchers. WARNING indicates the potential for personal injury and CAUTION indicates the potential for damage to equipment. For emphasis, certain Safety Precautions are repeated throughout the manual. It is important toreview ALL Safety Precautions before operating or servicing the unit.
  • Page 7 The stretcher has a warning label located on the control box cover stating: To reduce the risk of electrical shock do not remove the cover. Service by qualified personnel only. Always disconnect the power source whenever servicing any electric powered stretcher. Do not use a sharp instrument to remove fuse, as it may scratch the circuit board.

  • Page 8: Unpacking Instructions

    If all features work properly, go to step 5. If any of the features of the stretcher do not work properly, call STERIS for service. Step 5 – Clean the stretcher using a mild detergent to remove any dirt accumulated during shipment.

  • Page 9: Operating Instructions

    4D2DPA which states: Maxi- mum patient weight 283 Kilograms (625 lbs.). NOTE: All dimensions are specified in inches. All dimension are ±.375 inches. STERIS reserves the right to change specifications without notice. Stretcher weight: 315 lbs. KNEE FLEX 90° MAx KNEE FLEX...
  • Page 10 500 lbs. 90° MAx KNEE FLEX NOTE: All dimensions are specified in inches. All dimension are ±.375 inches. STERIS reserves the right to change specifications without notice. Stretcher weight: 315 lbs. KNEE FLEX HMC Models Specifications Shown Electrical Specifications Electrical Specifications (Applies only to 4E1 &...

  • Page 11: Features, Warnings And Proper Operation

    3.2 Features, Warnings and Proper Operation WARNINGS – CAUTIONS AND PROPER I – Floors must be smooth and level to maintain OPERATION: optimum fifth wheel steering. Fifth wheel steer- ing functions can be influenced by floor ir- A– The stretchers have a warning label located at regularities (bumps or dips) greater than 1/2"...
  • Page 12 See Warnings E & J See Warnings D & H See Warnings C & G See Warnings J thru N See Warnings B & C See Warning H See Warning F 069389 Operator Manual Operating Instructions...

  • Page 13: Braking And Steering Operation

    3.3 Braking and Steering Operation The four wheel central braking system is activated by depressing the red pedal 3.3.1 Applying the Brakes at any of the four corners of the unit (Figure 3-1). To fully engage the brakes, the pedal should be pressed to approximately 45º. All four caster wheels should be locked from swiveling and rotating.

  • Page 14: Litter Top Height Adjustment (4E1 Models Only)

    3.4 Litter Top Height Adjustment (4E1 Models Only) 3.4.1 Height Adjustment Press the pump pedal to the floor (Figure 3-4), then release. Repeat this process until desired height is obtained. Use smooth strokes on the pedal to ensure patient comfort. Figure 3-4 3.4.2 Lowering Litter Top Press down on the two release pedals at the same time (Figure 3-5) until...

  • Page 15: Reverse Trendelenburg Adjustment

    3.4.4 Reverse Place the unit at maximum height, see Height Adjustment . Press down on the Trendelenburg Adjustment release pedal nearest the foot end (Figure 3-7) until desired position is obtained. Then remove pressure. Figure 3-7 3.5 Electric Control Locations To access the nurses control panel, pull out on the handle located at the foot end 3.5.1 Nurses Control of the unit, under the top (Figure 3-8).

  • Page 16: Emergency Electric Backrest Overide

    3.5.4 Emergency Electric The unit is equipped with a Fowler backrest quick drop handle located under the Backrest Override litter top at stretcher mid section. (See the stretcher specification page). This option is only to be used in an emergency situation. The label states: Emergency Drop Backrest Pull Handle to Activate .

  • Page 17: Fowler Adjustment

    3.6.2 Fowler Adjustment Lockout – Unlocking : Turn the knob located under the first row of buttons on the control panel, clockwise approximately 90º (Figure 3-15). Locking : Turn the knob under the first row of buttons, counter-clockwise approximately 90º. Nurse: Press either of the up or down arrows located on the first row of buttons on the control panel (Figure 3-16).

  • Page 18: Trendelenburg Adjustment (4E2 & 4D2 Models Only)

    3.6.5 Trendelenburg Lockout: See Lockout in the Section 3.6.1 Height Adjustment Instructions . Adjustment (4E2 & 4D2 Nurse: Trendelenburg: Press the top button on the fourth row of buttons on the Models only) control panel (Figure 3-22). Hold in the button until desired angle is achieved. Rev-Trendelenburg: Press the bottom button on the fourth row of buttons on the control panel (Figure 3-23).

  • Page 19: Retracto Rail Operation

    3.8 Retracto Rail Operation W A R N I N G – P E R S O N A L INJURY HAZARD: Be sure rail is locked before leaving patient. 3.8.1 Raising the Rail Grasp the rail top cap in the middle of the rail (Figure 3-27) and lift. Figure 3-27.

  • Page 20: Push Handle Operation (Optional Accessory)

    3.9 Push Handle Operation (Optional Accessory) 3.9.1 Raising the Push Hinge the push handle up (Figure 3-30) until it stops. Slide the push handle down Handles into the socket until it stops. Repeat process for handle on the other side. (Figure 3-31).

  • Page 21: Extending I.v. Rod

    3.10.2 Extending I.V. Rod Lift up on top of I.V. rod (Figure 3-33) until desired length is achieved. Figure 3-33. Press button located in the gray housing (Figure 3-34) and lower I.V. Rod until 3.10.3 Retracting I.V. Rod desired height is achieved. Repeat process with second housing as required. Figure 3-34.

  • Page 22: Trouble Shooting Guide

    TROUBLE SHOOTING GUIDE 4.1 Electric Powered Stretchers WARNING: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified per- sonnel only. Then One motor or one column does not Step1: Check all motor and column plug connections at the controller box. move but all others are operating Step 2: If a column does not move: Check the the connection at the column.

  • Page 23: Battery Replacement Instructions

    Step 3: Replace (both) batteries with ‘YUSHA’ #NP 1.2-12, 12 volt, 1.2 Ah batteries. (Steris P/N 075759 – 2 required. Step 4: Be sure battery connector in in place on left side of batteries. Step 5: Replace cover. 069389...

  • Page 24: Recommended Preventive Maintenance

    Wipe with damp cloth to remove After each use Routine hospital grade • Lubricate pivot points after cleaning Accessories any foreign materials disinfectants, soap and water For more details information, please contact: STERIS Corporation at: 1-800-333-8828 Recommended Preventive Maintenance Operator Manual 069389...

  • Page 25: Optional Accessories

    OPTIONAL ACCESSORIES I.V. Poles Universal 000E17-00 Stainless steel 42" long fixed height I.V. rod - removable 000018-00 Stainless steel 27" to 54" long telescoping I. V. rod 128770-00 000018 - telescoping I.V. rod with cable attachment 126740-00 Infusion pump I.V. rod 1 1/8" dia - 42" long - removable IVSTOW-00 Mobile I.V.
  • Page 26 Fifth wheel, electric horizon auto track 4E1 (Hydraulic) 075797-00 Fifth wheel, horizon auto track It is recommended that only STERIS approved accessories be used with this device. To order accessories or for more detailed information on accessories please contact STERIS At: 1-800-428-7833...

  • Page 27: Recommended Replacement Parts

    RECOMMENDED REPLACEMENT PARTS Recommended Replacement Parts Operator Manual 069389...
  • Page 28 Important Note: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified personnel only. For detailed plug locations, see Figures 7-9, 7-10, 7-18 & 7-19. For detailed label locations, see Figures 7-11 &...
  • Page 29 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-1- 4E1 HYDRAULIC BASE ASSEMBLY ........068331 ASSEMBLY, Base Frame ............062672 CASTER, Tente, Brake ..............062671 CASTER, Tente, Swivel Lock ............062659 PLATE, Caster Bolt Lock ............. 062685 SCREW, Hex Head Cap, M8 x 1.25 x 12.00" Long ..... 065041 BOLT, Eye, 5/16-18 ..............
  • Page 30 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 068512 PILE, Velcro, 2.0" x 5/8" .............. 068376 SPACER, Cover ................068208 BASE, Top Cover-Horizon ............068550 BELLOWS, Gray, Round ............. 066583 PLATE, Bellows Attachment ............062378 CHAIN, Anti-Static ............... 068475 TAPE, Double Sided, 2.0"...
  • Page 31 Important Note: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified person- nel only. For detailed plug locations, see Figures 7-9, 7-10, 7-18 & 7-19. For detailed label locations, see Figures 7-11 &...
  • Page 32 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-2- 4E2/4D2 ELECTRIC BASE ASSEMBLY ........075457 ASSEMBLY, Base Frame ............062672 CASTER, Tente, Brake ..............062671 CASTER, Tente, Swivel Lock ............062672 PLATE, Caster Bolt Lock ............. 062685 SCREW, Hex Head Cap, M8 x 1.25 x 12.00" Long ..... 065041 BOLT, Eye, 5/16-18 ..............
  • Page 33 Important Note: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified personnel only. For detailed plug locations, see Figures 7-9 & 7-10. For detailed label locations, see Figures 7-11. Figure 7-3. 4E2/4D2 – DPA Top Assembly 069389 Operator Manual Recommended Replacement Parts...
  • Page 34 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-3- 4E2/4D2 – DPA TOP ASSEMBLY ..........069221 WELDMENT, Top, Head/Wide Top ..........069225 WELDMENT, Top, Foot/Wide ............069234 TOP, Seat Sheet Pan/Wide ............067292 SCREW, Button Head Cap, 5/16-18 x 3/4" Long ......031057 NUT, Lock, 5/16-18 ..............
  • Page 35 Cable Style Quick Drop Used only on models prior to 11/97 Important Note: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified personnel only. For detailed plug locations, see Figures 7-9 & 7-10. For detailed label locations, see Figures 7-11.
  • Page 36 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-4- 4E2/4D2 – DPA FOWLER ASSEMBLY ........075015 FRAME, Fowler, Electric, Wide ........... 066696 PIN, Fowler Hinge ................ 069237 SHEET, Fowler Cover, Wide ............075443 NUT, Cap, 1/4" ................075437 PLATE, Actuator ................075442 ROD, Pull ..................
  • Page 37 Important Note: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified personnel only. For detailed plug locations, see Figures 7-9 & 7-10. For detailed label locations, see Figures 7-11. Figure 7-5. Leg Section Assembly 7-12 069389 Operator Manual...
  • Page 38 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-5- LEG SECTION ASSEMBLY ............P69226 WELDMENT, Knee Frame, Wide Top ......... P69232 ASSEMBLY, Foot Frame, Wide Top ..........069229 TOP, Kneeflex Foot Support/Wide ..........P69236 TOP, Foot Section Cover Sheet/Wide ......... P69235 TOP, Knee Section Cover Sheet/Wide ........
  • Page 39 NOTE: Only one side of rail and one side of latch is shown for clarity, the bill of material reflects parts required for a For detailed plug locations, see Figures 7-9, 7-10, 7-18 & 7-19. complete stretcher. For detailed label locations, see Figures 7-11 & 7-20. Figure 7-6.
  • Page 40 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-6- AIRGLIDE RAIL ASSEMBLY ............068453 WELDMENT, Air Glide Rail ............066619 WASHER, Nylon ................066616 BOLT, Shoulder, 1/2" x 1-1/2" Long ..........066613 CAP, Rail Latch ................031325 SCREW, Button Head Cap, 1/4-20 x 1/2" Long ......066595 LINK, Lower, Left .................
  • Page 41 Important Note: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified personnel only. For detailed plug locations, see Figures 7-9 & 7-10. For detailed label locations, see Figures 7-11. Figure 7-7. 4E2/4D2 – DPA Controller Assembly (After 5/1/00) 7-16 069389 Operator Manual...
  • Page 42 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-7- 4E2/4D2 – DPA CONTROLLER ASSEMBLY (AFTER 5/1/00) .. 076133 WELDMENT, Controller Hanger Plate ......... 075736 STRAP, Controller Hanger ............075749 ASSEMBLY, Low Battery LED ............. 075044 CONTROLLER, CB-14, 120VAC, 4E2 Models ......075718 CONTROLLER, CB-14, 230VAC, 4D2 Models ......
  • Page 43 Important Note: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified personnel only. For detailed plug locations, see Figures 7-9 & 7-10. For detailed label locations, see Figures 7-11. Figure 7-8. DPA Controller Assembly (Before 5/1/00) 7-18 069389 Operator Manual...
  • Page 44 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-8- DPA CONTROLLER ASSEMBLY (BEFORE 5/1/00) ....075009 Controller Hanger ................ 068962 CONTROLLER, CB-10 (Before 10/98) ........075044 CONTROLLER, CB-14 (After 10/98) ........... 075467 CONTROLLER, CB-10, 230 VAC, 4D2 (Before 10/98) ....075718 CONTROLLER, CB-14, 230 VAC, 4D2 (After 10/98) ....
  • Page 45 Important Note: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified personnel only. For detailed label locations, see Figures 7-11. Figure 7-9. DPA Plug and Wiring Diagram (After 5/1/00) 7-20 069389 Operator Manual Recommended Replacement Parts...
  • Page 46 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-9- 063031 BUTTON ..................065403 TIE, Cable (Large) ............... 7-21 Recommended Replacement Parts Operator Manual 069389...
  • Page 47 Important Note: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified personnel only. For detailed label locations, see Figures 7-11. Figure 7-10. DPA Plug and Wiring Diagram (Before 5/1/00) 7-22 069389 Operator Manual Recommended Replacement Parts...
  • Page 48 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-10 DPA PLUG AND WIRING DIAGRAM (BEFORE 5/1/00) 7-23 Recommended Replacement Parts Operator Manual 069389...
  • Page 49 Both Sides Both Sides Both Sides Both Sides Both Sides/ Both Ends Both Sides Figure 7-11. 4E2 – DPA Label Locations 7-24 069389 Operator Manual Recommended Replacement Parts...
  • Page 50 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-11- 4E2 – DPA LABEL LOCATIONS ..........4D2 – DPA LABEL LOCATIONS ..........075836 LABEL, Side-Electric Stretcher ............ 075831 LABEL, Base End ................ 068855 LABEL, Electric Service ............... 076127 LABEL, Serial Number, 110V Electric ......... –...
  • Page 51 Important Note: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified personnel only. For detailed plug locations, see Figures 7-18 & 7-19. For detailed label locations, see Figures 7-20. NOTE: The “O” suffix on the part numbers marked with an “...
  • Page 52 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-12- 4E2/4D2 – HMC TOP ASSEMBLY ..........075413 WELDMENT, Top ................ 068461 ASSEMBLY, Roller Bracket, Right ..........068536 ASSEMBLY, Roller Bracket, Left ..........031057 NUT, Lock, 5/16-18 ..............068481 PLATE, Foot End Support ............067958 BUMPER, Corner .................
  • Page 53 Important Note: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified personnel only. For detailed plug locations, see Figures 7-18 & 7-19. For detailed label locations, see Figures 7-20. Figure 7-13. HMC Fowler Assembly 7-28 069389 Operator Manual...
  • Page 54 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-13- HMC FOWLER ASSEMBLY ............075425 Fowler Frame-Electric / Wide ............062037 Shoulder Bolt, 1/2 x 2 ..............065879 Fowler Cover Sheet/Wide ............075443 NUT, Cap, 1/4" ................075437 PLATE, Actuator ................075440 ROD, Quick Drop Release, Short ..........
  • Page 55 Important Note: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified personnel only. For detailed plug locations, see Figures 7-18 & 7-19. For detailed label locations, see Figures 7-20. Figure 7-14. HMC Leg Section Assembly 7-30 069389 Operator Manual...
  • Page 56 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-14- HMC LEG SECTION ASSEMBLY ..........P65626 WELDMENT, Knee Frame, Extra Wide ........P65629 ASSEMBLY, Foot Frame, Extra Wide ......... 062254 SUPPORT, Kneeflex Foot, Extra Wide ........P62261 SHEET, Foot Section Cover , Extra Wide ........P33050 SHEET, Knee Section Cover, Extra Wide ........
  • Page 57 NOTE: Only one side of rail is shown for clarity. The bill of material reflects parts required for a complete unit. Figure 7-15. Retracto Rail Assembly 7-32 069389 Operator Manual Recommended Replacement Parts...
  • Page 58 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-15- RETRACTO RAIL ASSEMBLY ........... 075057 ASSEMBLY, Top Cap, Left ............075056 ASSEMBLY, Top Cap, Right ............068886 RIVET, Cherry, Female End ............068886 RIVET, Cherry, Male End ............068882 LEG, Offset .................. 035137 ROCKER ..................
  • Page 59 Important Note: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified personnel only. For detailed plug locations, see Figures 7-18 & 7-19. For detailed label locations, see Figures 7-20. Figure 7-16. 4E2/4D2 – HMC Controller Assembly (After 5/1/00) 7-34 069389 Operator Manual...
  • Page 60 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-16- 4E2/4D2 – HMC CONTROLLER ASSEMBLY (AFTER 5/1/00) . 065135 HANGER, Controller, Rear E.W..........075044 CONTROLLER, CB -14, 120 VAC, 4E2 ........075718 CONTROLLER, CB -14, 230 VAC, 4D2 ........061159 SCREW, Truss Head Machine, #10 24 x 5/8"...
  • Page 61 Important Note: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified personnel only. For detailed plug locations, see Figures 7-18 & 7-19. For detailed label locations, see Figures 7-20. Figure 7-17. 4E2/4D2 – HMC Controller Assembly (Before 5/1/00) 7-36 069389 Operator Manual...
  • Page 62 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-17- 4E2/4D2 – HMC CONTROLLER ASSEMBLY (BEFORE 5/1/00) 068962 CONTROLLER, CB-10, 120 VAC, 4E2 ........075044 CONTROLLER, CB-14, 120 VAC, 4E2 (After 5/1/00) ....075467 CONTROLLER, CB-10, 230 VAC, 4D2 ........075718 CONTROLLER, CB-14, 230 VAC, 4D2 (After 5/1/00) ....
  • Page 63 Important Note: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified personnel only. For detailed label locations, see Figures 7-20. See Note 3 See Note 3 Notes: 1. Wrap excess cable and tie with cable tie (2) 5 each. Place bundles on top of controller before attaching top cover.
  • Page 64 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-18- HMC PLUG AND WIRING DIAGRAM (AFTER 5/1/00) ....068864 RELIEF, Strain ................065403 TIE, Cable, (Large) ..............063031 BUTTON ..................7-39 Recommended Replacement Parts Operator Manual 069389...
  • Page 65 Important Note: To reduce the risk of electric shock, do not remove the cover. Unit is to be serviced by qualified personnel only. For detailed label locations, see Figures 7-20. Figure 7-19. HMC Plug and Wiring Diagram (Before 5/1/00) 7-40 069389 Operator Manual Recommended Replacement Parts...
  • Page 66 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-19- HMC PLUG AND WIRING DIAGRAM (BEFORE 5/1/00) ... 063031 BUTTON ..................065403 TIE, Cable, (Large) ..............068864 RELIEF, Strain ................7-41 Recommended Replacement Parts Operator Manual 069389...
  • Page 67 Both Sides Both Sides Both Sides Both Sides Figure 7-20. 4E2/4D2 – HMC Label Locations 7-42 069389 Operator Manual Recommended Replacement Parts...
  • Page 68 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-20- 4E2 – HMC LABEL LOCATIONS ..........4D2 – HMC LABEL LOCATIONS ..........075836 LABEL, Side-Electric Stretcher ............ 075831 LABEL, Base End ................ 068855 LABEL, Electric Service ............... 076127 LABEL, Serial Number, 110V Electric ......... –...
  • Page 69 10 11 NOTE: I.V. Rod is shown mounted on patient’s left, which is standard. The I.V. rod can be mounted on the patient’s right by bolting to the other side angle using Item 13 in place of Item 8 and Item 14 in place of Item 9.
  • Page 70 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-21- 075590 I.V. ROD ASSEMBLY, AIRGLIDE RAIL TOP, PAT LEFT (AFTER 10/1/98) ................. 075591 I.V. ROD ASSEMBLY, AIRGLIDE RAIL TOP, PAT RIGHT (AFTER 10/1/98) ................. 075543 I.V. ROD ASSEMBLY, RETRACTO RAIL TOP (AFTER 10/1/98) 062038 SCREW, Button Head Cap, 1/4 -20 x 5/8"...
  • Page 71 3 section mounted I.V. rod assemblies Figure 7-22. HMC I.V. Rod Assembly (Before 10/1/98) 7-46 069389 Operator Manual Recommended Replacement Parts...
  • Page 72 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-22- 066021 HMC I.V. ROD ASSEMBLY (BEFORE 10/1/98) ......066002 ASSEMBLY, Hinge ..............066012 TUBE, Outside ................031438 PIN, Spring, 3/16" x 1-1/4" ............066014 BUSHING, Large Screw Collar Squeeze ........066013 COLLAR, Large Screw ..............
  • Page 73 Figure 7-23. DPA I.V. Rod Assembly (Before 10/1/98) 7-48 069389 Operator Manual Recommended Replacement Parts...
  • Page 74 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-23- 066725 DPA I.V. ROD ASSEMBLY (BEFORE 10/1/98) ......066727 ASSEMBLY, I.V. Rod Support and Mount ........066731 TUBE, Short Outside ..............031438 PIN, Spring, 3/16" x 1-1/4" ............066014 BUSHING, Large Screw Collar Squeeze ........066013 COLLAR, Large Screw ..............
  • Page 75 Accessory Number: 075665-00 Push Handles – Airglide Tops Accessory Number: 075656-00 Push Handles – Retracto Rail Tops Figure 7-24. Push Bar Assembly After 6/1/99) 7-50 069389 Operator Manual Recommended Replacement Parts...
  • Page 76 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-24- 075665 PUSH BAR ASSEMBLY, AIRGLIDE RAIL TOP (AFTER 6/1/99) 075656 PUSH BAR ASSEMBLY, RETRACTO RAIL TOP (AFTER 6/1/99) ................065631 ASSEMBLY, Push Handle A ............075642 ASSEMBLY, Push Handle B ............075637 •...
  • Page 77 NOTE: 1. Apply petroleum lubricant to the inside of the channels. 2. Apply laquer to the inside of Items 5 & 11. Figure 7-25. HMC Push Bar Assembly (Before 6/1/99) 7-52 069389 Operator Manual Recommended Replacement Parts...
  • Page 78 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-25- 068826 HMC PUSH BAR ASSEMBLY (BEFORE 6/1/99) ....... 068828 WELDMENT, Push Handle, Left ..........068827 WELDMENT, Push Handle, Right ..........068831 CHANNEL, Push Handle, Left ............. 068839 CHANNEL, Push Handle, Right ........... 067144 GRIP, Push Bar Hand ..............
  • Page 79 NOTE: 1. Apply petroleum lubricant to the inside of the channels. 2. Apply laquer to the inside of Items 5 & 11. Figure 7-26. DPA Push Bar Assembly (Before 6/1/99) 7-54 069389 Operator Manual Recommended Replacement Parts...
  • Page 80 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-26- 068699 DPA PUSH BAR ASSEMBLY (BEFORE 6/1/99) ....... 068657 WELDMENT, Push Bar Handle, Left ........... 068661 WELDMENT, Push Bar Handle, Right ......... 068648 WELDMENT, Push Bar Channel, Left ......... 068647 WELDMENT, Push Bar Channel, Right ........
  • Page 81 8.88 Electric 12.00 Hydraulic 8.19 Hydraulic 8.88 Electric Figure 7-27. Fifth Wheel Assembly (After 9/1/99) 7-56 069389 Operator Manual Recommended Replacement Parts...
  • Page 82 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-27- 075798 FIFTH WHEEL ASSEMBLY – HORIZON ELECTRIC (AFTER 9/1/99) ................075797 FIFTH WHEEL ASSEMBLY – HORIZON HYDRAULIC (SHOWN) (AFTER 9/1/99) ............075796 ASSEMBLY, Sub ................. – 031055 NUT, Lock, 1/4-20 ................ 031006 SCREW, Hex Head Cap, 1/4-20 x 1 1/4"...
  • Page 83 Figure 7-28. Fifth Wheel Assembly (After 9/1/99) 7-58 069389 Operator Manual Recommended Replacement Parts...
  • Page 84 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-28- 075799 FIFTH WHEEL SUB-ASSEMBLY– HORIZON ELECTRIC (AFTER 9/1/99) ................075796 FIFTH WHEEL SUB-ASSEMBLY – HORIZON HYDRAULIC (SHOWN) (AFTER 9/1/99) ............075775 WELDMENT, Mounting Bracket, Left Hand ......... 075771 SPRING, Torsion ................. 011422 COLLAR ..................
  • Page 85 Figure 7-29. Fifth Wheel Assembly (Before 9/1/99) 7-60 069389 Operator Manual Recommended Replacement Parts...
  • Page 86 FIG. & UNITS PER PART ITEM DESCRIPTION ASSEMBLY NUMBER 7-29- 068516 FIFTH WHEEL ASSEMBLY (BEFORE 9/1/99) ......ASSEMBLY, 4E2 Base ..............051308 NYLINER, Flange, 3/4" x 1-1/8" ........... 068360 ASSEMBLY, Swivel Bracket ............068429 PLATE, 5th Wheel Hinge ............. 068415 WHEEL, 4th .................

This manual is also suitable for:

Hausted horizon 4e1Hausted horizon 4e2Hausted horizon 4d2

Table of Contents