Advertisement
3.4. You will then see this screen, telling you the system is initializing (acquiring its location from the GPS satellites).
Keep watching the screen.
NOTE
Initialization averages about 10 minutes, but it can take as long as 45 minutes. If it completes within 10 minutes,
the screen changes to the globe screen.
3.5. If the system does not initialize within 10 minutes, a second screen (shown below) appears. The system is still
initializing, but it will not automatically change to the globe screen when the initialization is complete. Do not follow
the screen instructions right away. After 30 minutes, try turning the power system to OFF then to ON to see if the
system completed the initialization. If it did not, then follow the screen instructions.
NOTE
The initialization screen may appear after battery voltage to the audio-navigation unit has been disconnected for
more than 5 minutes. If that happens, follow the screen instructions. If you are still unable to get GPS
initialization, do a search in the service information using keyword GPS.
3.6. When initialization is complete, this screen appears. Press ENTER.
NOTE
Do not enter a destination yet. For the navigation system to calculate a route, it must align the current location to a
mapped road (map matching). This happens when you start driving.
Page 5 of 9
Advertisement
