1. Manuals
  2. Brands
  3. Nortek Manuals
  4. Heat Pump
  5. GHH09KSK4DH
  6. Owner's manual and installation instructions

Nortek GHH09KSK4DH Owner's Manual And Installation Instructions

Cold climate heat pump systems indoor units
Hide thumbs
Table of Contents

Advertisement

Quick Links

NORTEK GLOBAL HVAC, LLC
Owner's Manual
Installation Instructions
Cold Climate Heat Pump Systems
Indoor Units
Indoor Models: GHH09(2.6)KSK4DH
Please read this owner's manual carefully before operation and retain for future reference.
If you have lost the owner's manual, please visit www.NortekHVAC.com for electronic version.
GHH12(3.5)KSK4DH
GHH18(5.2)KSK4DH

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GHH09KSK4DH and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Nortek GHH09KSK4DH

Summary of Contents for Nortek GHH09KSK4DH

  • Page 1 NORTEK GLOBAL HVAC, LLC Owner’s Manual Installation Instructions Cold Climate Heat Pump Systems Indoor Units Indoor Models: GHH09(2.6)KSK4DH GHH12(3.5)KSK4DH GHH18(5.2)KSK4DH Please read this owner’s manual carefully before operation and retain for future reference. If you have lost the owner’s manual, please visit www.NortekHVAC.com for electronic version.
  • Page 2 Special Note Remote Control This model air conditioner uses an RF (radio frequency) remote control. The remote must be calibrated to the air conditioner before it can be used. remote. Note: Hold the remote within 6 feet (2m) of the air conditioner. Air conditioner and remote should both be in standby status.

  • Page 3: Table Of Contents

    Contents Operation Notices Precautions............1 Parts .
  • Page 4 Explanation of Symbols DANGER WARNING CAUTION Indicates important but not hazard-related information, NOTICE User Notice Children and persons with reduced mental, sensory or physical capabilities should not be allowed to operate or maintain this equipment.

  • Page 5: Precautions

    Precautions WARNING Operation and Maintenance This appliance should not be used by children or persons with reduced physical, sensory or mental Children shall not play with the appliance. by children. Do not connect air conditioner to multi-purpose socket. Otherwise, it may cause electric shock. Do not wash the air conditioner with water to avoid electric shock.
  • Page 6 Precautions WARNING Do not block air outlet or air inlet. It may cause malfunction. Do not spill water on the remote controller. When below situations occur, please turn off air conditioner and disconnect power immediately, and service. - Circuit breaker trips off frequently. If the air conditioner malfunctions, it may cause electric operation switch, please press this switch with an...
  • Page 7 Precautions WARNING Attachment the unit. Use approved power supply circuit and circuit breaker A circuit breaker must be used. Include a circuit break with suitable capacity, please note the capacity table. Air switch should include from circuit-short and overload. Use only an approved power cord. Make sure the power supply matches the requirement listed on nameplate.
  • Page 8 Precautions keep all cords and cables away from the copper tube. The appliance shall be installed in accordance with Installation must be performed in accordance with the requirement of NEC and CEC by authorized personnel only. The air conditioner is Class I electric appliance. It must may cause electric shock.
  • Page 9 Precautions Once installed the air conditioner should not be moved and installed in a different location. Select a location which is out of reach for children and far away from animals or plants. If it is unavoidable, please put up a fence for safety purpose. The indoor unit should be installed close to the wall Installation instructions and use of this product are provided by manufacturer.
  • Page 10 Precautions FCC STATEMENT NOTE: This equipment has been tested and found to suant to part 15 of the FCC Rules. These limits are de- interference in a residential installation. This equipment and, if not installed and used in accordance with the instructions,may cause harmful interference to radio com- munications.
  • Page 11 Precautions IC STATEMENT This device complies with Industry Canada licence-ex- (1) this device may not cause interference, and interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de li- cence.
  • Page 12 Precautions IC STATEMENT Cet appareil est conforme aux limites d’exposition au rayonnement RF stipulées par la FCC et l’IC pour une utilisation dans un environnement non contrôlé. Les an- tennes utilisées pour cet émetteur doivent être installées et doivent fonctionner à au moins 8 pouces (20 cm) de distance des utilisateurs et ne doivent pas être placées près d’autres antennes ou émetteurs ou fonctionner avec ceux-ci.

  • Page 13: Parts

    Parts Indoor Unit Air Inlet Panel Power Cord Filter Horizontal Louver Air outlet Remote Controller Display Power Temperature Display NOTICE: Illustrations provided apply to different models and are for reference only. Actual...

  • Page 14: Remote Control Buttons

    Remote Control Buttons 3. Cool Button 4. Heat Button 5. Fan Button 6. I Feel Button 8. Mode Button 11. Clock Button Button 13. Temp Button 14. X-Fan Button 16. Sleep Button 17. WIFI Button Display Screen Icons Set Fan Speed Operation Mode Battery Power Auto Mode...

  • Page 15: Remote Control Button Description

    Remote Control Button Description Note: have no effect on the air conditioner. will be ON (red indicator). After that, you can operate the air conditioner by been sent and receive. conditioner, operation indicator color may be different on different models), and indoor unit will emit a sound. Cool Button Heat Button FAN Button...
  • Page 16 Remote Control Button Description Under AUTO speed, air conditioner will select proper fan speed automatically based on the ambient temperature. I FEEL Button Press this button to start I FEEL function. The icon will be displayed on the re- mote controller. When function is set, the remote controller will send the detected I FEEL function and the icon will disappear.
  • Page 17 Remote Control Button Description speed. Press ton won’t start up the unit.) Note: minutes to blow air (actual delay time is depend on indoor ambient temperature). The unit will sense the room temperature and automatically select a suitable run- Button icon will display on the remote.
  • Page 18 Remote Control Button Description T-OFF button this button icon disappears and the word OFF mote. quickly. Release the button when you reached desired time. Press T-OFF to con- CLOCK Button Press this button to set clock time. The icon on remote controller will blink. Press + or - button within 5 seconds to set clock time.
  • Page 19 Remote Control Button Description or no display with remote controller, temperature indicator on indoor unit displays set temperature. with remote controller, temperature indicator on indoor unit displays indoor ambient temperature. with remote controller, temperature indicator on indoor unit displays outdoor ambient temperature. Note: Outdoor temperature display is not available for some models.
  • Page 20 Remote Control Button Description Sleep Button Cancel Sleep 1 and Sleep 2 are preset temperature curves. Sleep 3 - the sleep curve can be set by the user as follows 1) Under Sleep 3 mode, press and hold the Temp button. The timer will display 3) The timer will automatically increase to the next hour (That is, 1 hr will entered.

  • Page 21: Combination Button Functions

    Combination Button Functions Lock Remote Press + and - buttons simultaneously to lock or unlock the remote buttons. If the remote controller is locked, the button on the remote in which case, press any button, the will blink three times. If not displayed, the remote buttons are unlocked.

  • Page 22: Operation Guide

    Operation Guide turn on the air conditioner. 2. Press Mode button to select your required mode: AUTO, COOL, DRY, FAN, HEAT. 3. Press+ or - button to set your required temperature. (Temperature can’t be 4. Press the Fan button to set your required fan speed: auto, low, medium and 5.

  • Page 23: Operation With Smart Phone, Tablet, Etc

    Operation with Smart Phone, Tablet, etc. Special Function This equipment can be controlled with smart phone, tablet, or similar device. The trol devices can be used. icon will appear similar to the one shown below. The examples shown in this manual are from the iPhone 6. Your display Examples are also shown with Celsius temperatures;...
  • Page 24 Operation with Smart Phone, Tablet, etc. 2. Turn on the AC WiFi: 1) Turn the AC on. Make sure the remote controller matches the air conditioner. 2) Press and hold the WiFi button on the remote controller for at least 3 sec- onds.
  • Page 25 Operation with Smart Phone, Tablet, etc. Attention: for security, change the network settings! password (refer to the attachment: safe mode and password instruction). conditioner screen, and the AC list will be blank. in step...
  • Page 26 Operation with Smart Phone, Tablet, etc. How to reset the AC WiFi module: Turn off air conditioner with the remote controller and disconnect the power. Re- connect power supply, and wait for 1 minute. Press WiFi and Mode buttons simul- the WiFi module is successfully reset.
  • Page 27 Operation with Smart Phone, Tablet, etc. Main Screen Selection and Descriptions 1. Mode: sets operation mode for air conditioner. You can select Auto, Cool, more information.
  • Page 28 Operation with Smart Phone, Tablet, etc. App Key Instructions 1. Preset: Sets the Timer On and Timer Off function. Please refer to the remote control section of this manual for more details on these optional features added to the air conditioner . E-heater is not available for this model.
  • Page 29 Operation with Smart Phone, Tablet, etc. 4.1. Note: Sleep function can’t be set under Auto or Fan Mode. Only Traditional Sleep function can be selected under Dry mode. 4.2. actual installation location. 4.3. metrical to the air conditioner. The “Avoid people” function can be turned on or off based on personal pref- erence.
  • Page 30 Operation with Smart Phone, Tablet, etc. 4.4. Noise: Sets the sound level output of the air conditioner. Sound level selec- tions vary by model and size. 4.5. indoor and outdoor temperature.
  • Page 31 Emergency Operation low) will turn on or turn off the air conditioner. Lift display panel to access auxiliary button. When air conditioner is turned on with auxiliary button, it will operate under auto mode. Panel WARNING Display panel to press the auxiliary button Auxiliary button Cleaning &...
  • Page 32 Cleaning & Maintenance Cleaning the Filter 3. Clean Filter 1. Open Panel Pull out the panel and raise it up as shown below. Note: water can not be warmer than dry place until dry. 2. Remove Filter shown below 4. Reinstall Filter WARNING...
  • Page 33 Cleaning and Maintenance Notice: Preseason Checklist 1. Check whether air inlets and air outlets are blocked. Notice: Post-Season Checklist 1. Disconnect power supply. Disposal and Recycling sponsibly. 2. Contact local dealer or service center for the proper disposal method.

  • Page 34: Troubleshooting

    Troubleshooting General Analysis Malfunction Check Items Solutions The air conditioner may have been sent too rapidly from the wireless controller Is the remote controller within (25 ft). Are there obstacles between Remove obstacles. Wireless controller the remote controller at the won’t work unit.
  • Page 35 Troubleshooting Malfunction Check Items Solutions Wait until power recovery. Circuit break trips off or fuse Ask professional to replace circuit break or fuse. Air conditioner Call professional for repair. won’t run Unit has restarted immediate- Wait for 3 min, and then turn Reset the function.
  • Page 36 Troubleshooting Malfunction Check Items Solutions The noise is the sound of the unit, which is normal. This is the sound of friction Cracking noise contraction of panel or other temperature. When air conditioner malfunctions, the temperature indictor Error Codes code. Please refer to the below list for required action to be taken. Error Code Troubleshooting Note:...

  • Page 37: Installation Clearances

    Installation Clearances etc. allowed around indoor unit. Top -15cm (6 in) Side - 15cm (6 in) Side - 15cm (6 in) Front - 300cm (10 ft) Bottom - 250cm (8 ft)

  • Page 38: Tools For Installation

    Tools for Installation 1. Level 6. Torque wrench 11. Pressure Meter 2. Screwdriver 7. Open-end wrench 12. Universal meter 3. Impact drill 8. Pipe cutter 13. Alan wrench 4. Drill bit 9. Leak detector 5. Pipe expander 10. Vacuum pump Note: Proper power cord must be used.

  • Page 39: Electrical Requirements

    Electrical Requirements Safety Precautions 2. Use approved power supply, circuit and circuit breaker as required by local 3. Make sure the power supply matches with the requirement listed on the name- approved power supply cable. safety. Grounding Requirement tric shock. wire.

  • Page 40: Indoor Unit Installation

    Indoor Unit Installation Step one: choosing installation location Step two: install wall-mounting frame screw locations on the wall. 2. Drill holes in the wall for screws. Insert plastic expansion or anchor in the hole. Step three: open piping hole shown as below. Mark midway point Level...
  • Page 41 Indoor Unit Installation Note: Take all appropriate safety pre- Indoor Outdoor dust as possible. The plastic expansion anchors 5-10° are not provided and should be Ø55 or 70mm Step four: outlet pipe 2. After selection position of outlet conditioner. Left Cut out the hole Left...
  • Page 42 Indoor Unit Installation Hex Nut Diameter Open-end Wrench 15~20 30~40 Union Nut 45~55 60~65 Pipe Torque 70~75 Wrench Indoor Pipe with tape. to a Flex Match outdoor unit, a transitional Step six: install drain hose 1. Connect the drain hose to the outlet pipe of indoor unit.
  • Page 43 Indoor Unit Installation cable-cross hole at the back of indoor unit and then pull it out from the front Cable-cross Hole side. 3. Remove the wire clip; connect the power connection wire to the wir- Power Connection Cord power cable with the wire clip. the electrical box cover.
  • Page 44 Indoor Unit Installation Step eight: bind up pipe Connection Pipe Drain Hose Tape 1. Bind the connection pipe, power cord and drain hose with tape. Indoor and Outdoor Power Cord Indoor Gas Pipe Unit Indoor Power Cord 3. Bind them evenly. Liquid Pipe Band...

  • Page 45: Leak Detection

    Vacuum Pumping 1. Remove the valve caps on the Liquid Valve Piezometer vent. Gas Valve Valve Cap Vent Nut ant valve and then connect Vacuum Pump vacuum pump. Allen Wrench pletely and operate for 10-15 min to check if the pressure Close Open -0.1MPa.

  • Page 46: After Installation Checklist

    After Installation Checklist Items to check Possible result The unit may fall, shake or emit noise. It may cause condensation and water It may cause condensation and water It may cause short circuit. Does the power cord match the speci- Is there any obstruction in the air inlet Is the dust and debris from installation Test Operation...
  • Page 47 - 5m (16 ft), 7.5m (25 ft), 8m (26 ft). of connec- of connec- Capacity tion pipe difference Capacity tion pipe difference 15M (50 ft) 5M (16 ft) 25M (65 ft) 10M (33 ft) (1465W) (7032W) 15M (50 ft) 5M (16 ft) 30M (100 ft) 10M (33 ft) (2051W)
  • Page 48 Diameter of connection pipe mm (in) Liquid Pipe Gas Pipe Ø 9.52 or 12 Ø 6 or 9.52 Ø 16 or 19 Ø 19 or 22.2 Ø 25.4 or 31.8...

  • Page 49: Pipe Expansion Method

    Pipe Expansion Method Note: A. Cut the pipe E. Expand the port - Expand the port with expander. indoor and outdoor units. cutter. Hard Pipe Mold Expander “A” Pipe Cutter Correct: Pipe 90° Uneven Burr Note: eter, please refer to the table below: B.
  • Page 52 66129923003...

This manual is also suitable for:

Ghh12ksk4dhGhh18ksk4dhGhh092.6ksk4dhGhh123.5ksk4dhGhh185.2ksk4dh

Table of Contents