Page 1
NORTEK GLOBAL HVAC, LLC Owner’s Manual Installation Instructions Split System Heat Pumps • Please read this owner’s manual carefully before operation and retain for future reference. •...
Page 7
Precautions WARNING Attachment • • the unit. • • • • note the capacity table. Air switch should include • • • listed on nameplate. Unstable power supply or incorrect • •...
Page 8
Precautions WARNING • • • • • Installation must be performed in accordance with the only. • • • • accessible. • All wires of indoor unit and outdoor unit should be connected by a professional. • • • installed in the line.
Page 9
Precautions WARNING • • Select a location which is out of reach for children and please put up a fence for safety purpose. • Working Temperature Range NOTICE: •...
Page 10
Parts Name Indoor Unit Air Inlet Panel Display Power Indicator Indicator ☼ Indicator Indicator Indicator Remote Outdoor Unit Air Inlet NOTICE:...
Page 11
Remote Control Buttons Display Screen Icons Operation Mode Illustration is for reference only. Actual Temp. Display Type...
Page 12
Remote Control Button Description Note: • • remote controller. • • Press this button to select your required operation mode. ☼ • • indicator • •...
Page 13
Remote Control Button Description • Heat indicator Note: • • Auto Note: • • • • • • Hold Note: •...
Page 14
Remote Control Button Description mode. turbo function and icon will disappear. • • function and icon will disappear. temperature or outdoor ambient temperature on indoor unit’s display. As shown • indoor unit displays set temperature. • displays indoor ambient temperature. •...
Page 15
Remote Control Button Description • after a set temperature is set up. • • indicator displays current temperature and automatically returns to display set • will be displayed on the remote will disappear. • icon on remote icon is displayed. •...
Page 17
Combination Button Functions Child Lock Function icon is displayed on remote controller. If you Temperature Scale Display Function WIFI Function WiFi” icon will be displayed on the remote...
Page 18
Operation Guide on the heat pump. Replacing Batteries in Remote Reinstall Notice • window on indoor unit. • • • • batteries. • replace batteries.
Page 20
Cleaning and Maintenance WARNING • • • Cleaning the Surface of Indoor Unit or damp cloth to wipe it. NOTICE: • Clean Filter Pull out the panel and raise it up as shown below. dry place until dry. shown below...
Page 21
Cleaning and Maintenance WARNING • • • Notice: Preseason Checklist Notice: Post-Season Checklist Disposal and Recycling responsibly.
Page 22
Troubleshooting General Analysis Malfunction Check Items Solutions • • from the wireless controller • Is the remote controller within • • Are there obstacles between • • Wireless controller • the remote controller at the won’t work unit. • • them if needed.
Page 23
Troubleshooting Malfunction Check Items Solutions • • • • • • Heat pump won’t • • • Unit has restarted • • • Reset the function. • Mist emitted from is humid and cooled rapidly. • Is indoor temperature and indoor unit air indoor temperature and outlet...
Page 24
Troubleshooting Malfunction Check Items Solutions • • • • Cracking noise contraction of panel or other temperature. Error Codes • Illustrations are for reference Indoor ☼ only. Actual equipment may Error Error Code Troubleshooting (Heating indicator ON 10s, malfunction. OFF 0.5S) Note:...
Page 26
Installation Clearances etc. allowed around indoor and outdoor units.
Page 27
Tools for Installation 3. Impact drill Pipe cutter Vacuum pump Note: • • Proper power cord must be used. Installation Location Selection Basic requirement: in the air. Indoor Unit Outdoor Unit Select a location where the noise and and air outlet. Select a location where the condensation water can be drained easily and won’t drip connect the outdoor unit and near the power...
Page 29
Indoor Unit Installation Step one: choosing installation location Step two: install wall-mounting frame screw locations on the wall. Step three: open piping hole shown as below.
Page 30
Indoor Unit Installation Note: • Indoor much dust as possible. • Step four: outlet pipe 2. After selection position of outlet heat pump. case. the hole unit Pipe Joint Union Nut Pipe nut with torque wrench.
Page 31
Indoor Unit Installation Union Nut Pipe Indoor Pipe tape. Step six: install drain hose pipe of indoor unit. Note: • Hose Pipe indoor drain hose in order • Screw Step seven: connect wire of Panel indoor unit...
Page 32
Indoor Unit Installation indoor unit and then pull it out from the front side. Hole Power power cable with the wire clip. N(1) white (brown) Install conduit assembly. a. Attach conduit assembly to the conduit board and lead the connection wire b.
Page 33
Indoor Unit Installation Step eight: bind up pipe cord and drain hose with tape. Indoor Gas Pipe Unit Pipe be bound separately at the end. Note: • hose and power cord for installation • at the bottom. indoor power and then separate the drain hose.
Page 34
Outdoor Unit Installation Step one: secure the support structure (select it based on installation needs) screws. Note: • • • order to install drain. • screws are needed. Step two: install drain joint Step three: secure outdoor (Only for cooling and heating unit Place the outdoor unit on the unit)
Page 35
Outdoor Unit Installation Step four: connect indoor and outdoor pipes bellmouth. below. Gas Pipe Pipe Joint Union Nut Secure the power supply cor and the connection cord with cord clamp. Reinstall the handle. N(1) Green Green Power...
Page 36
Outdoor Unit Installation Note: • secure. • Step six: Arrange the pipes inside. Note: • • the drain pipe connection on the indoor unit. hose must not rise. • hose must not slope up. hose must not slope up. outlet must not be placed in water.
Page 37
Vacuum Pumping Piezometer Vent Nut Vacuum Pump Allen 7. Reinstall the handle. Leak Detection...
Page 38
After Installation Checklist • Items to check Possible result It may cause condensation and water It may cause condensation and water It may cause short circuit. Is there any obstruction in the air inlet Is the dust and debris from installation Test Operation operation.
Page 41
Pipe Expansion Method Note: indoor and outdoor units. cutter. Pipe Hard Pipe Note: Pipe Hold indoor connection pipe and Smooth Surface nut on the pipe. Union Pipe Pipe Surface...
Page 46
Optional Wired Controller Auto • • • Press Timer repeatedly the time Press Timer to cancel Press Enter/Cancel to...
Page 47
Optional Wired Controller Press Timer repeatedly the time Press Timer to cancel Press Enter/Cancel to...
Page 48
Optional Wired Controller Press Function Press Enter/Cancel to repeatedly to enter Press Enter/Cancel to Press Function repeatedly to enter screen.
Page 49
Optional Wired Controller 3.7. Press Function Press Enter/Cancel to repeatedly to enter Press Enter/Cancel to Press Function repeatedly to enter...
Page 50
Optional Wired Controller Press Function Press Enter/Cancel to repeatedly to enter Press Enter/Cancel to Press Function repeatedly to enter...
Page 51
Optional Wired Controller function will be turned on automatically. Press Function Press Enter/Cancel without E-heater repeatedly to enter Press Enter/Cancel to Press Function repeatedly to enter...
Page 52
Optional Wired Controller Press Function Press Enter/Cancel to repeatedly to enter Press Enter/Cancel to Press Function repeatedly to enter screen.
Page 53
Optional Wired Controller Screw Screw Name embedded in Soleplate the wall...
Page 54
Optional Wired Controller attention. until installation is complete. CAUTION controller communications lines must be shielded twisted pair wires.
Page 56
Optional Wired Controller Error Error Pump-down Jumper error protection Indoor and outdoor communication error protection Indoor unit full water error Indoor and outdoor units unmatched current protection temperature protection circuited protection short circuited Sensor connection protection short circuited circuited short circuited circuit error"...
Need help?
Do you have a question about the GXH30LSK4DH and is the answer not in the manual?
Questions and answers