Advertisement
10. Disassemble each IOM. See the IOM disassembly procedure.
11. Disassemble each rear fan. See the rear fan disassembly procedure.
12. Disassemble each controller fan. See the controller fan disassembly procedure.
13. Disassemble the chassis. See the chassis disassembly procedure.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
3.2.1 PCM disassembly procedure
ss
Artesyn PSU – RMN: 700-014575-XXXX
(where XXXX- can be any alphanumeric combination which does not affect safety)
1. Remove the eight casing screws using a Philips #1 bit screwdriver and slide the casing in the direction shown
by the red arrow.
MF877-00
Page 3
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at
MF877-01
Advertisement
