HP Cray Cls 4U 106-18TB Disassembly Instructions Manual page 13

3.2.3 Rear fan disassembly procedure
1. Remove the connector from the frame by pushing the connector as shown by the arrows in the image below.
2. Remove the six screws as shown in the image below using a Phillips #1 bit. Then pull out the metal frame as
shown by the arrow.
MF877-00
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at MF877-01
Page 13