Front Panel Leds - Cisco Firepower 4100 Series Manual

Overview
Network Ports
Management Port

Front Panel LEDs

The following figure and table describe the Firepower 4100 front panel LEDs.
Figure 6: Front Panel LEDs
• USB drive formatted with FAT32
• Boot kick-start image from the Supervisor ROMMON for discovery recovery purposes
• Copy files to and from workspace:/ and volatile:/ within local-mgmt. The most relevant files are:
• Core files
• Ethanalyzer packet captures
• Tech-support files
• Security module log files
• Platform bundle image upload using download image usbA:
The USB Type A port does not support Cisco Secure Package (CSP) image upload.
The Firepower 4100 chassis has eight fixed ports that require 1-Gb/10-Gb SFP/SFP+ transceivers (fiber
or copper). They are numbered from left to right starting with 1 and are named Ethernet 1/1 through
Ethernet 1/8. The 4100 also has two network module slots that support different numbers of ports
depending on the network module. See
See for Supported SFP/SFP+ and QSFP Transceivers, on page 26
Each port has LEDs that represent link/activity status.
The Firepower 4100 chassis has a management port that requires a 1-Gb fiber or copper SFP.
Network Modules, on page 11
the list of supported transceivers.
Front Panel LEDs
for the supported network modules.
Overview
9