Serial Number Location - Cisco Firepower 4100 Series Manual

Serial Number Location

3
5
7
9
11
13
15
Serial Number Location
The serial number for the Firepower 4100 series chassis is located on the pullout asset card on the front panel.
Overview
6
Two power cords (country-specific)
See Power Cord Specifications, on page 34
a list of supported power cords.
Two slide rails with two M3 x 0.5 x 6-mm screws
(48-101144-01)
Artesyn tie wrap and tie wrap clamp (part number
52-100204-01)
Ground lug kit (part number 69-1000359-01):
• One ground lug #6 AWG, 90 degree, #10
post (part number 32-0608-01)
• Two 10-32 x 39-8-inch Phillips Head screws
(part number 48-0700-01)
Cisco Firepower 4100
This document has a URL pointing to the
hardware installation guide, a URL pointing the
regulatory and safety guide, and a QR code and
URL pointing to the Getting Started Guide.
4 10/100/1000BASE-T SFP transceiver
for
6
Flextronics tie wrap and tie wrap clamp (part
8
number 52-100202-01)
10 Two slide rail locking brackets (part number
700-105350-02)
Six 8-32 x 0.375-inch Phillips screws (part
number 48-2696-01)
12
14 Cable management bracket kit (part number
69-100376-01)
• Two cable management brackets (part
number 700-106377-01)
• Four 8-32 x 0.375-inch Phillips screws (part
number 48-2696-01)
Overview