Insert A Microsd Card; Charge The Battery - Nokia 7500 Prism Manual

Hide thumbs Also See for 7500 Prism:
Table of Contents

Advertisement

Observe the battery contacts (7), and insert the battery
(8). Place the upper part of the back cover on the device
(9), and close it (10).

Insert a microSD card

Use only compatible microSD cards approved by Nokia for
use with this device. Nokia uses approved industry
standards for memory cards, but some brands may not be
fully compatible with this device. Incompatible cards may
damage the card and the device and corrupt data stored
on the card.
1. Switch the device off, and remove the back cover and
the battery of the device.
2. Slide the memory card
holder to unlock (1).
3. Open the card holder (2),
and insert the memory
card into the card holder
with the contact surface
facing inward (3).
4. Close the card holder (4),
and slide it to lock (5).
5. Insert the battery, and attach the back cover to the
device.

Charge the battery

Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from the AC-3 or AC-4 charger.
The exact charger model number may vary depending on
the type of plug. For example, the model numbers for the
AC-3 charger can be AC-3C, AC-3U, AC-3X, etc.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
1. Connect the charger to a wall socket.
13

Advertisement

Table of Contents
loading

Table of Contents