Insert A Microsd Card; Remove The Microsd Card - Nokia 6300 User Manual

G e t s t a r t e d
3. Observe the battery contacts (6), and
insert the battery (7). Slide the back
cover into its place (8).

Insert a microSD card

Use only compatible microSD cards approved by Nokia for use with this device.
Nokia uses approved industry standards for memory cards, but some brands may
not be fully compatible with this device. Incompatible cards may damage the card
and the device and corrupt data stored on the card.
1. Remove the back cover of the device.
2. Insert the card into the microSD card slot with the
contact surface facing down, and press it until it locks
into place.
3. Close the back cover of the device.

Remove the microSD card

Important: Do not remove the memory card in the middle of an operation
when the card is being accessed. Removing the card in the middle of an
operation may damage the memory card as well as the device, and data
stored on the card may be corrupted.
You can remove or replace the microSD card during phone operation without
switching the device off.
1. Make sure that no application is currently accessing the microSD memory card.
2. Remove the back cover of the device.
3. Press the microSD card slightly in to release the lock.
4. Remove the microSD card from the slot.
15