Security - Nokia 7500 Prism Manual

bearer, and packet data access point or GSM dial-up
number.
Connect to support
●
settings from your service provider
Personal config. sett.
●
personal accounts for various services and to activate
or delete them. To add a new personal account if you
have not added any, select Add; otherwise, select
Options Add new. Select the service type, and
>
select and enter each of the required parameters. The
parameters differ according to the selected service
type. To delete or activate a personal account, scroll to
it, and select Options

Security

When security features that restrict calls are in use (such
as call barring, closed user group, and fixed dialing), calls
may be possible to the official emergency number
programmed into your device.
Select Menu Settings
>
following options:
PIN code request
●
the device to ask for your PIN or UPIN code every time
the device is switched on. Some SIM cards do not allow
the code request to be turned off.
PIN2 code request
●
is required when using a specific device feature which
is protected by the PIN2 code. Some SIM cards do not
allow the code request to be turned off.
42
— to download the configuration
— to manually add new
Delete or Activate.
>
Security and from the
>
and UPIN code request — to set
— to select whether the PIN2 code
Call barring service — to restrict incoming calls to and
●
outgoing calls from your device (network service). A
barring password is required.
Fixed dialling — to restrict your outgoing calls to
●
selected phone numbers if this function is supported
by your SIM card. When the fixed dialing is on, GPRS
connections are not possible except while sending text
messages over a GPRS connection. In this case, the
recipient's phone number and the message center
number must be included in the fixed dialing list.
Closed user group — to specify a group of people
●
whom you can call and who can call you (network
service)
Security level — Select
●
for the security code whenever a new SIM card is
inserted into the device. If you select Memory, the
device asks for the security code when the SIM card
memory is selected, and you want to change the
memory in use.
Access codes — to change the security code, PIN code,
●
UPIN code, PIN2 code, or barring password
Code in use — to select whether the PIN code or UPIN
●
code should be active
Authority certificates
●
the list of the authority or user certificates downloaded
into your device. See "Certificates," p. 60.
Security module sett.
●
details, activate Module PIN
module PIN and signing PIN. See "Access
codes," p. 10.
Phone to set the device to ask
or User certificates — to view
— to view Secur. module
request, or change the