Message Sending Process; E-Mail - Nokia 7500 Prism Manual

Hide thumbs Also See for 7500 Prism:
Table of Contents

Advertisement

Select
Options
Reply as
>
answer to a message.

Message sending process

To send the message, select Send. The phone saves the
message in the
Outbox
Note: Your device may indicate that your message
was sent to the message center number programmed into
your device. Your device may not indicate whether the
message is received at the intended destination. For more
details about messaging services, contact your service
provider.
If an interruption occurs while the message is being sent,
the phone tries to resend the message a few times. If
these attempts fail, the message remains in the
folder. To cancel the sending of the messages in the
Outbox
folder, scroll to the desired message, and select
Options
Cancel
sending.
>

E-mail

The e-mail application uses a packet data connection
(network service) to allow you to access your e-mail
account. This e-mail application is different from the SMS
e-mail function. To use the e-mail function on your device,
you need a compatible e-mail system.
You can write, send, and read e-mail with your device and
you can get a notification about new e-mail on your
account. Your device supports POP3 and IMAP4 e-mail
servers.
24
and the message type to
folder, and the sending starts.
Outbox
Before you can send and retrieve any e-mail messages,
you must obtain a new e-mail account or use your current
account. To check the availability and the settings of your
e-mail account, contact your e-mail service provider.
You may receive the e-mail configuration settings as a
configuration message. See "Configuration setting
service," p. 10.
To setup your e-mail preferences, select
Messaging
Message settings
>
See "E-mail messages," p. 31.
E-mail setup wizard
The e-mail setup wizard starts automatically if no e-mail
settings are defined in the phone, or to start the setting
wizard , select
Menu
Messaging
>
Options
Add mailbox
>
Using e-mail setup wizard may require inernet connetction
and may require network support and you may need to
pay for the service.
To enter the settings manually, select
Messaging
E-mail
mailbox
>
mailbox
Create
manually.
>
The e-mail application may requires an internet access
point without a proxy. WAP access points normally include
a proxy and do not work with the e-mail application.
Write and send an e-mail
You can write your e-mail message before connecting to
the e-mail service; or connect to the service first, then
write and send your e-mail.
1. Select
Menu
Messaging
>
mail
message.
2. If more than one e-mail account is defined, select the
account from which you want to send the e-mail.
Menu
>
E-mail
messages.
>
E-mail
mailbox
>
E-mail setup wizard
>
.
Menu
>
Options
Add
>
>
Create message
>
>
E-
>

Advertisement

Table of Contents
loading

Table of Contents