Packet Data - Nokia 7500 Prism Manual

use Nokia approved enhancements for this model. Check
with the manufacturers of other devices to determine
their compatibility with this device.
There may be restrictions on using Bluetooth technology
in some locations. Check with your local authorities or
service provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
Set up a Bluetooth connection
Select Menu Settings
>
and from the following options:
Bluetooth — Select
●
function. indicates that Bluetooth is activated.
My phone's visibility
●
shown to other Bluetooth devices
Search audio enhanc.
●
Bluetooth audio devices. Select the device that you
want to connect to the phone.
Active devices — to check which Bluetooth
●
connection is currently active
Paired devices — to search for any Bluetooth device
●
in range. Select New
range. Select a device and Pair. Enter an agreed
Bluetooth passcode of the device (up to 16 characters)
to pair the device to your device. You must only give
this passcode when you connect to the device for the
first time. Your device connects to the other device, and
you can start data transfer.
My phone's name
●
Bluetooth connections
38
Connectivity Bluetooth
> >
On to activate the Bluetooth
— to define how your device is
— to search for compatible
to list any Bluetooth device in
— to set the device name for
If you are concerned about security, turn off the Bluetooth
function, or set My phone's visibility
accept only Bluetooth communication from others whom
you trust.

Packet data

General packet radio service (GPRS) is a network service
that allows mobile devices to send and receive data over
an internet protocol (IP)-based network.
To define how to use the service, select
Settings Connectivity
>
conn. and from the following options:
When needed — to set the packet data connection to
●
established when an application needs it. The
connection will be closed when the application is
terminated.
Always online — to set the device to automatically
●
connect to a packet data network when you switch the
device on.
You can connect the device using Bluetooth wireless
technology or USB data cable connection to a compatible
PC and use the device as a modem to enable GPRS
connectivity from the PC.
To define the settings for connections from your PC, select
Menu Settings Connectivity
> >
Packet data settings
>
activate the access point you want to use. Select
active access pt. Alias for access
>
to change the access point settings, and select OK. Select
Packet data acc. pt., enter the access point name (APN)
to establish a connection to a network, and select OK.
Establish an internet connection by using your phone as
a modem. See "Nokia PC Suite," p. 61. If you have set the
to Hidden. Always
Menu
>
Packet data Packet data
> >
Packet data
>
Active access point, and
Edit
point, enter a name
>