Further details are described in
"Call," p. 40.
Enhanced voice dialing
You can make a phone call by saying the name that is
saved in the contact list of the device.
Voice commands are language-dependent. Set the
Recognition lang.
before using voice dialing. See
"Phone," p. 40.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection
key or the volume down key. A short tone sounds, and
Speak now
is displayed.
2. Speak the name of the contact you want to dial clearly.
If the voice recognition is successful, a list with
matches is shown. The device plays the voice
command of the first match on the list. If it is not the
correct command, scroll to another entry.
Using voice commands to carry out a selected device
function is similar to voice dialing. See "Voice
commands," p. 37.
Answer or reject a call
To answer an incoming call, press the call key. To end the
call, press the end key.
To reject an incoming call, press the end key. To mute the
ringing tone, select Silence.
20
Speed
dialling. See
To answer a waiting call during an active call (network
service), press the call key. The first call is put on hold. To
end the active call, press the end key. You may also
activate the
Call waiting
Options during a call
Many of the options that you can use during a call are
network services. For availability, contact your service
provider.
During a call, select
Options
options:
Call options are
Mute
or Unmute, Contacts, Menu,
keypad, Record,
Voice
clarity,
Handset.
Network options are
Answer
New
call,
Add to
conference,
the following:
Send DTMF
— to send tone strings
●
Swap
— to switch between the active call and the call
●
on hold
Transfer
— to connect a call on hold to an active call
●
and disconnect yourself
Conference
— to make a conference call
●
Private call
— to have a private discussion in a
●
conference call
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume may
be extremely loud.
function. See "Call," p. 40.
and from the following
Loudspeaker
or
or Reject,
Hold
or Unhold,
End
call,
End all
calls, and
Lock