Advertisement
Available languages
Available languages
Installation
DO NOT MODIFY UNLESS DIRECTED BY TRIPP LITE TECHNICAL SUPPORT
Default Ethernet setting (0=Auto, 1=10 Half, 2=10 Full, 3=100 Half, 4=100
Full)?
[Auto]
DO NOT MODIFY UNLESS DIRECTED BY YOUR ADMINISTRATOR
You can also change the root password, real-time clock and other settings.
Tripp Lite recommends against changing the default settings unless you are an
advanced user with a specific purpose. After you have finished entering settings,
the Accessory will save changes to memory and reboot (this may take several
minutes). After the Accessory reboots, the initialization page should display the
new static IP settings.
3-8
Remove Configuration Cable: Remove the configuration cable that connects the
Accessory to the computer.
4 - Test and Configure
4-1
Test Network Connection: After an IP address has been assigned to the
Accessory, try to access it with a Web browser that supports frames, forms and
Java™. Open a Web browser on a computer connected to the LAN and enter the
Accessory's IP address. You should be prompted for a password. The user name
is admin and the default password is admin. After you enter the user name and
password, the PowerAlert Status page will appear in the browser window. For
more information about configuration and operation of the managed device, refer
to the User's Guide, included on the CD-ROM bundled with the Accessory.
201110124-93-3108.indb 9
9
11/3/2011 11:59:52 AM
Advertisement
