Advertisement
Available languages
Available languages
Installation
This SNMP/Web Management Accessory allows users to operate compatible Tripp Lite
UPS Systems and Inverter/Chargers as manageable devices on the network,
accessible via Web browser, Network Management Station or telnet.
1 - Preparation
Confirm Package Contents: In addition to this manual, your package should
1-1
include the following:
• Configuration cable (73-1025)
• CD-ROM containing additional documentation and Management Information
Base (MIB) files for use with Network Management Systems (not otherwise
required)
• Standard RS-232 (DB9) serial cable
• 120V AC Adapter* or 230V AC Adapter**
• Euro (Universal) to Hybrid E/F CEE 7/7 plug adapter**
• 12V DC cable**
* Comes with SNMPWEBSOLO only.
** Comes with SNMPWEBSOLOHV only.
Install UPS or Inverter/Charger: Install your UPS or Inverter/Charger and turn it
1-2
on before installing the Accessory.
Locate MAC Address: The 12-digit MAC address (000667xxxxxx) is attached to
1-3
the underside of the Accessory.
Determine Network Installation Method: If your network's DHCP server will
1-4
assign a dynamic IP address to the Accessory automatically, proceed to
2 - Dynamic IP Address Assignment. If you will assign a static IP address to
the Accessory manually, proceed to 3 - Static IP Address Assignment. If you
are uncertain which method to use, contact your network administrator for
assistance before continuing the installation process.
201110124-93-3108.indb 2
2
11/3/2011 11:59:50 AM
Advertisement
