Advertisement
Available languages
Available languages
Installation
3 - Static IP Address Assignment/Terminal Menu
Configuration Settings
Determine IP Information: Before assigning a static IP address, you'll need to
3-1
know the IP address, gateway address and subnet mask. If you do not have this
information, contact your network administrator for assistance.
Configure Terminal Emulation Program: Open a VT100-compatible terminal
3-2
emulation program (such as the HyperTerminal program bundled with Microsoft
®
Windows
) on a computer with an available DB9
serial port. A notebook computer may be the
most convenient choice. Set the terminal
emulation program to use the COM port
corresponds to the DB9 serial port. Specify the
parameters
B
Accessory terminal interface:
If the terminal emulation program supports multiple emulation modes, you may
also need to specify VT100 emulation
A
201110124-93-3108.indb 4
required to communicate with the
Bits per second:
Data bits:
A
that
Parity:
Stop bits:
Flow control:
C
.
B
4
®
9600
8
None
1
None
C
11/3/2011 11:59:51 AM
Advertisement
