Advertisement
Available languages
Available languages
Installation
4-2
Default Shutdown Setting (UPS Only): During a loss of utility power, the
Accessory is configured to shut down the UPS system 2 minutes after a low
battery signal is received from the UPS. This allows the UPS to provide the
maximum available runtime to connected equipment. If you want to change the
default setting, follow these instructions:
1. From the initial PowerAlert Status page, click the Settings button
of the screen, then click the Events button
the screen.
2. From the Event Settings page, confirm that the Low Battery Shutdown
is checked and then click the Details Tab
to access the Setting Details page.
3. From the Details page
drop down menu
B
D
Note for Network Management System Users Only: Two MIB files - Tripplite.mib
and RFC1628.mib - must be loaded on each Network Management Station that
will monitor the UPS system or Inverter/Charger via SNMP . The files are provided
on the CD-ROM included in the product package.
201110124-93-3108.indb 10
E
, choose your preferred settings from the Settings
F
and click the Save Changes button
A
C
B
that appears at the left side of
D
, or double-click the checked box
10
A
at the top
C
box
G
.
F
G
E
11/3/2011 11:59:52 AM
Advertisement
