Kenwood KVT-M707 Instruction Manual page 9

1 Play/Pause
[38] key
Pauses and replays a disc.
2 Video Source Selection
[V.SEL] key
Video source selection changes in the following order
each time you press the key.
Video/ TV*
Rear view camera*
Navigation*
*Optional accessory
You can also turn off the video display by pressing the
key longer than 1 second.
When you press the key again, the previous video
display comes back on.
3 Audio Source Selection/Power Supply
[SRC] key
Audio source selection changes in the following order
each time you press the key.
You can also turn off the power by pressing the key
longer than 1 second.
When you press the key again,the power turns on.
Push it again to turn the power on.
4 Volume Controls
[VOLUME] key
*Optional accessory
5 Track/Station Selectors
[4]/[¢] key
Selects a music, chapter, track, or frequency.
6 Band/Folder Selectors
[FM]/[AM] key
[FM] key switches to the FM1/2/3 band or next folder/
disc.
[AM] key switches to the AM band or previous folder/
disc.
7 Attenuator
[ATT] key
Attenuates the volume.
Press it again to cancel muting.
8 Select Seek Mode
[AUTO] key
Selects the Seek mode. (see pages 16/26/34/38 for the
<Seek Mode>)
9 Screen Setup
[SCRN] key
Displays the Screen Control or Angle Control screen.
(see page 45)
p Function
[FNC] key
The video source function changes in the following
order each time you press the key.
Switches the source that is output at the AV OUTPUT
terminal when it is pressed more than 1 second.
q Switch Screen Mode
[MODE] key
Switches the screen mode. (see page 12)
Aside from the navigation system, the display turns on
•
when you apply the parking brake.
It is necessary to set "Navigation Source" of <AV Interface>
•
to "On" to add Navigation as an audio source that can be
selected the with [SRC] key. (see page 53)
It is necessary to engage the shift knob of car to "Reverse"
•
to switch to rear iew camera video display.
9
|
English