Audio Control; Displaying The Audio Control 1 Screen; Displaying The Audio Control 2 Screen - Kenwood KVT-M707 Instruction Manual

Before Use

Audio Control

You can adjust the front/ rear and right/ left audio balance.
Displaying the Audio Control 1
screen
Audio Control 1 screen
1
4
5
3
2
7
- 1
1
Displaying the Audio Control 2
screen
Audio Control 2 screen
Me n u
BMS AMP Bass
11
BMS AMP FREQ
13
Audio Control 2
6
5
6
8 8
7 9
10
11
F l a t
12 12
Low
Normal
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Setup Menu. (see page 46)
4 Calls the Sound Effects Menu.
5 Adjusts the right and left volume balance.
1
6 Adjusts the front and rear volume balance.
7 Adjusts the volume of the present source based on
the difference level of original volume.
• If you have increased the volume first, then reduced the
volume using the "Vol. Offset", the sound generated if you
suddenly switch to another source may be extremely loud.
1
8 Adjusts the subwoofer volume.
9 Turns the Loudness control function On or Off.
If turned "On", high and low tones are automatically
enhanced during low volume. (
p Displays the Audio Control 2 screen.
q Adjusts the bass boost of the B.M.S power amplifier
(optional accessory).
• You may not set some models of power amp boost to "+18".
See the catalog or instruction manual of power amplifier.
w Sets the center frequency of bass boost you have
set for "AMP Bass".
If you set the center frequency to "Low", it will be
dropped approximately 20% to 30%.
e Displays the Audio Control 1 screen.
On)
63
|
English