Driver Menu; Planogram Management - CPI Merchant Media 2 Combo Programming Manual

Driver Menu

Planogram Management

If PIN 1111 was entered and No Errors Exist, the home screen for the Driver menu will
appear. This menu allows limited access to the service modes. Touching an icon or Menu
bar on the screen will provide access to that menu.
Driver access allows you to:
Data Recall - View sales data.
Home all Un-homed Motors.
Planogram - Manage or Audit the existing.
View the Firmware information
Telemetry - Send a wireless DEX read.
Diagnostics Menu – View existing errors
For access to all other service modes use PIN # 3333
The Data Recall, Firmware Information and Telemetry Menus are duplicated in the
service Menu. See the Service Menu for detailed descriptions of these menus.
Planogram and Home Un-homed Motors
Although there are ways to manage the Planogram and Home Un-homed Motors in the
Service Menu, in the Driver Menu there are specific icons that allow quick access to these
menus.
The Planogram Management Icon allows you to assign the UPC code on the product
package to a selection.
Once a UPC code is assigned to a selection, the consumer will see an image of that
product when that selection is made.
Pressing the information Icon next to the product image will show the nutritional
information for that product.
For a UPC code to be valid The UPC Code must be in the Library or Planogram loaded in
the machine.
Deleting a UPC Code will cause that selection to show a generic picture on the display
and information icon will not be shown.
You can use the same UPC Code for multiple selections if you have two or more selections
of the same product Cashless customers can create and push planograms over the air or
a planogram can be loaded onto a USB and uploaded into the machine.
8