Operator / Technician Main Menu - CPI Merchant Media 2 Combo Programming Manual

Operator/Technician Menu
If PIN 3333 is entered and No Errors Exist, the Operators
/ Technician menu appears allowing access to the
service Menu bars. Each of the Menu Bars provides
access to detailed menus under the corresponding
heading. Pressing a Menu on the screen provides
access to that menu. Press the down arrow at the
bottom or top of the screens to toggle between the
screens shown.
Across the top of the Main Service Menu is a series of
three icons that will always be present when in the
service menu. The Back icon returns you to the prior
menu; The Home icon returns you to the Main Service
Menu, The Test icon is not currently used.
The content of the Main Menu area will change
depending what menu you are working in.
All the features normally associated with a touch screen, its icons and menu bars are possible, including:
Touching an icon or menu bar to toggle its current state (On to Off, Yes to No, etc.), or touching a menu item to access
another level of the tiered menu system. Alpha & numeric keypads will pop up when required for input. Confirmation
boxes will appear to confirm an item to be added or deleted. Another feature of this screen is that it shows the current
time, date, temperature and current Atlas LE board software revision at the bottom of the screen.
The following programming information is based on software version 11.4.1 b34
Service Mode Menu
MDB Level
Bill Validator
Stack Bills
Bill Acceptance
Coin Mechanism
Coins In/Out
Card Reader A
Card Reader B
Onboard Cashless Enable
MDB Cashless Cart
MDB Cashless Postpay Only
Show Currency Symbol
Decimal Separator
Correct Change Parms
Cash Discount
Entire Machine
Tray #1
Tray #2
Tray #3
Tray #4
Tray #5
Individual Prices
Non Resettable Sales Data
Resettable Sales Data
Events
Identification Numbers
SureVend Corrected Vends
11